South Coast Air Quality Management District, Form 400-E-2c (2014.07)
Mail To:
SCAQMD
P.O. Box 4944
Diamond Bar, CA 91765-0944
Tel: (909) 396-3385
www.aqmd.gov
South Coast Air Quality Management District
Form 400-E-2c
Gaseous Emission Control Form
Flare
This form must be accompanied by a completed Application for a Permit to Construct/Operate - Forms 400-A, Form 400-CEQA, and
Form 400-PS.
Page 1 of 2
Section A - Operator Information
Facility Name (Business Name of Operator That Appears On Permit): Valid AQMD Facility ID (Available On Permit Or Invoice Issued By AQMD):
Address where the equipment will be operated (for equipment which will be moved to various location in AQMD’s jurisdiction, please list the initial location site):
Fixed Location Various Locations
Section B - Equipment Description
Equipment
Manufacturer: Model No.:
Type
Operation
(See Rule 1118 for definition)
Clean Service Flare Emergency Service Flare General Service Flare
Dimension
Flare Height:
ft. Flare Tip Inside Diameter: ft.
Design Criteria for Waste
Gas Stream
Retention Time at Normal Operating Temperature:
secs at ˚F
For Steam Injection
Design Basis for Steam Injected:
lb steam/lb Hydrocarbons
Total Steam Flow Rate:
pounds/hour Number of Jets:
Temperature:
˚F Diameter of Jets: inches Velocity: feet per second
For Water Injection
Number of Water Jets:
Diameter of Water Jets: inches
Auxiliary Fuel Data
(e.g. gas injection, duct
burner)
Auxiliary fuel available? No Yes If Yes, indicate type:
Number of Pilots:
Fuel Rate per pilot (at 70 ˚F & 14.7 psia): SCFM
Fuel Usage: Cubic Feet Per Hour (ft
3
/hr) Gallons/Hour (gal/hr)
Maximum Minimum
Water Pressure (psig):
Total Water Flow Rate (gpm):
Maximum Minimum
Velocity At Tip:
(feet per second)
Flow Rate:
(scfm)
Maximum Minimum
Steam Pressure (psig):
Combustion Chamber Volume: cubic feet
Design Waste Stream Flow: scfm
Btu:
Maximum Minimum Average
Air Assisted
How is Flare Assisted? Steam Assisted
Non-Assisted
Elevated Ground Level Pit
South Coast Air Quality Management District, Form 400-E-2c (2014.07)
South Coast Air Quality Management District
Form 400-E-2c
Gaseous Emission Control Form
Flare
This form must be accompanied by a completed Application for a Permit to Construct/Operate - Forms 400-A, Form 400-CEQA, and Form 400-PS.
Page 2 of 2
CONFIDENTIAL INFORMATION
Under the California Public Records Act, all information in your permit application will be considered a matter of public record and may be disclosed to a third party. If you wish to keep
certain items as confidential, please complete the following steps:
(a) Make a copy of any page containing confidential information blanked out. Label this page “public copy.”
(b) Label the original page “confidential.” Circle all confidential items on the page.
(c) Prepare a written justification for the confidentiality of each confidential item. Append this to the confidential copy.
THIS IS A PUBLIC DOCUMENT
Pursuant to the California Public Records Act, your permit application and any supplemental documentation are public records and may be disclosed to a third party. If you wish to
claim certain limited information as exempt from disclosure because it qualifies as a trade secret, as defined in the District’s Guidelines for Implementing the California Public Records
Act, you must make such claim at the time of submittal
to the District.
Check here if you claim that this form or its attachments contain confidential trade secret information.
Material
Flow Rate (at 70 ˚F & 14.7 psia)
(scfm)
Maximum Minimum Average
BTU Rating
Section C - Waste Gas Stream Characteristics
Brief Description of
Process
Describe equipment vented to this Flare. Also describe the type of ignition system and its method of operation. Provide an explanation of
the control system for steam flow and rate and other operating variables. Please supply an assembly drawing, dimensioned to scale, to
show clearly the operation of the flare system. Show interior dimensions and features of the equipment necessary to calculate its
performance.
Waste Gas Stream
Instrumentation
Describe instrumentation for measuring temperature, pressure drop and other operating parameter (attach description, if necessary):
Operating Schedule
Normal:
hours/day days/week weeks/yr
Maximum:
hours/day days/week weeks/yr
Section D - Authorization/Signature
I hereby certify that all information contained herein and information submitted with this application is true and correct.
Preparer
Info
Signature: Date:
Title: Company Name:
Name:
Phone #: Fax #:
Email:
Contact
Info
Name:
Title: Company Name:
Phone #: Fax #:
Email:
Validate/Print
Reset