FORM: RESENERGY-3
PAGE 2
2007 Residential WSEC Chapter 6: Window, Skylight and Door Schedules
Project Address ____________________________________________________________ Permit Number ________________________________
Instructions: Fill out the window and door schedules. Use actual NFRC tested U-factor data whenever possible, or use the appropriate WSEC
Chapter 10 default table. Use the Glazing to Floor Area Calculation to determine your particular Prescriptive Option.
Plan Review (For Office Use Only)
The selected Option is appropriate for this dwelling design? Yes ( ) No ( )
NOTES: _____________________________________________________________________________________________________________
____________________________________________________________________________________________________________________
Approved By:__________________________________________________________________________ Date: _________________________
Window Schedule (include sliding glass doors)
Location
(Room)
Frame Type and
# of Panes
Manufacturer
and Model
List Reference
Source of U-factor
Size
(H x W)
Quantity
Area
(ft )
U-factor
UA Value
(Area x
U-factor)
Total Window Area:
Glazing
UA:
2
Skylight Schedule
Location
(Room)
Frame Type and
# of Panes
Manufacturer
and Model
List Reference
Source of U-factor
Size
(H x W)
Quantity
Area
(ft )
U-factor
UA Value
(Area x
U-factor)
Total Skylight Area:
Skylight
UA:
2
Door Schedule
One unregulated door is still allowed; Glazed doors are considered windows
Location
(Room)
Type
Glass
Area
(ft )
Single
Pane?
Manufacturer
and Model
Size
(H x W)
Quantity
Door Area
(ft )
U-factor
UA Value
(Door Area x
U-factor)
Area of Door Glass: Total Door Area:
Door
UA:
2
2
CITY OF SUMNER Permit Center (253)299-5523
1104 Maple Street, Sumner, WA 98390
FORM: RESENERGY-3 PAGE 3
Simple Heating System Size: Climate Zone 1
Project Information
Contact Information
0
0
0
0
0
0
Indoor Design Temperature 70
Outdoor Design Temperature
Design Temperature Difference
Indoor - Outdoor Design Temp
70
Conditioned Floor Area
Conditioned Volume
Glazing
Copy Sum of UA from Glazing Schedule 0
Attic U-factor X Area = UA
R-38 0.031 0.0
R-38 Scissor 0.035 0.0
R-38 Advanced 0.026 0.0
0.0
Single Rafter Joist U-factor X Area = UA
R-30 0.034 0.0
R-38 0.027 0.0
0.0
Above Grade Walls U-factor X Area = UA
R-21 0.057 0.0
0.0
Floors U-factor X Area = UA
R-30 0.029 0.0
0.0
Below Grade Walls U-factor X Area = UA
R-21 interior 0.037 0.0
R-10 exterior 0.056 0.0
0.0
Slab Below Grade F-factor X Length = UA
R-21 interior walls 0.57 0.0
R-10 exterior walls 0.42 0.0
0.0
Slab on Grade F-factor X Length = UA
R-10 perimeter 0.54 0.0
R-10 Full - Heated 0.51 0.0
0.0
FORM: RESENERGY-3 PAGE 4
Sum of UA
0
Envelope Heat Load
0
Btu /
Hour
Sum of UA X Design Temperature Difference
Air Leakage Heat Load
0
Btu /
Hour
((Volume X 0.6) X Design Outdoor Temp) X .018))
Building Design Heat Load
0
Btu /
Hour
Air Leakage + Envelope Heat Loss
Building and Duct Heat Load
1 0
Btu /
Hour
If ducts are located in unconditioned space: Sum of Building Heat Loss X 1.15
If ducts are located in conditioned space: Sum of Building Heat Loss X 1
Maximum Heat Equipment Output
150% 0
Btu /
Hour
Building and Duct Heat Loss X 1.50