Flow Application Information
General:
Pipe Size (O.D.): _____________________ Schedule/Wall Thickness: ____________________
Pipe Material: ________________________ Liner Material: ____________________________
Pressure Rating: ______________________ Process Connection: ________________________
Orientation: Horizontal: Vertical (upward flow): Vertical (downward flow):
Installation Conditions:
Indoor: Outdoor: Ambient Temperature: Min: ________ Max: _________
CAN THE PROCESS BE SHUT DOWN FOR INSTALLATION? YES NO
IS THERE A SOURCE OF NOISE/VIBRATION NEAR THE METER? YES NO
CAN PULSATING FLOW EXIST? YES
CAN VACUUM CONDITIONS EXIST? YES
NO
NO IF SO,
PLEASE SPECIFY: __________________
IS THE MEASUREMENT POINT IN AN AREA THAT COULD BECOME SUBMERGED? YES NO
FULL PIPE: YES NO
BI-DIRECTIONAL FLOW: YES NO
FLOW DESCRIPTION: CONSTANTLY STEADY VARIES SLIGHTLY VARIES CONSTANTLY
LINEAR DISTANCE OF STRAIGHT RUN AVAILABLE AT METER INSTALLATION SITE:
UPSTREAM ________________________________ DOWNSTREAM ___________________________________
PLEASE SPECIFY ANY POTENTIAL FLOW DISRUPTORS WITHIN 50 PIPE DIAMETERS OF INSTALL:
ELBOW ___________ TEE ___________ PUMP ___________VALVE ____________
DIFFUSER ____________TAPER _____________ OTHER: ________________________________
HAZARDOUS AREA: YES NO IF SO, PLEASE SPECIFY: ______________________________
1-800-884-4967 / sales@instrumart.com
Process Conditions: (please be specific)
Liquid: ________________________________ Gas: __________________________________
Steam: Saturated Superheated
Flow rate: Units: _________ Min: __________ Norm: ___________ Max: _____________
Pressure: Units: _________ Min: __________ Norm: ___________ Max: _____________
Temperature: Units: _________ Min: __________ Norm: ___________ Max: _____________
Viscosity: Units: _________ Min: __________ Norm: ___________ Max: _____________
Density: Units: _________ Min: __________ Norm: ___________ Max: _____________
Conductivity Value: _________________µS Suspended Solids: _______________________%
Control
Portable Permanent
Performance: (check all that apply)
Intended Use: Measurement
Measurement Type: Volumetric Mass
Velocity
Other __________
Expected Accuracy: +/- ___________% of rate or +/- ____________% of span
Expected Repeatability: +/- ___________% of rate or +/- ____________% of span
Battery/Wireless Power Supply:
24 VDC 120 VAC
Communication: HART Modbus Ethernet/IP Other _________________
Outputs:
4–20 mA ________ Pulse ________
Frequency _ ________
Relay
__________ Other
___________________________
Comments: