Fillable City of Pompano Beach (City of Pompano Beach)

Fill Online, Printable, Fillable, Blank City of Pompano Beach (City of Pompano Beach) Form

Use Fill to complete blank online CITY OF POMPANO BEACH (FL) pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

City of Pompano Beach (City of Pompano Beach)

On average this form takes 42 minutes to complete

The City of Pompano Beach (City of Pompano Beach) form is 6 pages long and contains:

  • 2 signatures
  • 12 check-boxes
  • 156 other fields

Country of origin: US
File type: PDF

U.S.A. forms for City of Pompano Beach

BROWSE CITY OF POMPANO BEACH (FL) FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
City of Pompano Beach
Department of Development Services
Building Inspections Division
100 W. Atlantic Blvd Pompano Beach, FL 33060
High Velocity Hurricane Zones Uniform Permit Application
Phone: 954.786.4669 Fax: 954.786.4677
Florida Building Code 7
th
Edition 2020
G:\Building\Forms & Documents\2020 Code Items\hv_hurrricane_roof_app2020.doc Page 1 of 6
SECTION 1525
HIGH-VELOCITY HURRICANE ZONES – UNIFORM PERMIT APPLICATION
Florida Building Code 7th Edition (2020)
High-Velocity Hurricane Zone Uniform Permit Application Form
INSTRUCTION PAGE
COMPLETE THE NECESSARY SECTIONS OF THE UNIFORM ROOFING PERMIT APPLICATION FORM AND
ATTACH THE REQUIRED DOCUMENTS AS NOTED BELOW:
Roof System
Required Sections of the
Permit Application Form
Attachments Required
See List Below
Low Slope Application
A, B, C
1, 2, 3, 4, 5, 6, 7
Prescriptive BUR-RAS 150
A, B, C
4, 5, 6, 7
Asphaltic Shingles
A, B, D
1, 2, 4, 5, 6, 7
Concrete or Clay Tile
A, B, D, E
1, 2, 3, 4, 5, 6, 7
Metal Roofs
A, B, D
1, 2, 3, 4, 5, 6, 7
Wood Shingles and Shakes
A, B, D
1, 2, 4, 5, 6, 7
Other
As Applicable
1, 2, 3, 4, 5, 6, 7
ATTACHMENTS REQUIRED:
1. Fire Directory Listing Page
2.
From Product Approval:
Front Page
Specific System Description
Specific System Limitations
General Limitations
Applicable Detail Drawings
3. Design calculations per Chapter 16, or if applicable, RAS 127 or RAS 128
4. Other Component Product Approval
5. Municipal Permit Application
6. Owner’s Notification for Roofing Considerations (Reroofing Only)
7. Any Required Roof Testing / Calculation Documentation
City of Pompano Beach
Department of Development Services
Building Inspections Division
100 W. Atlantic Blvd Pompano Beach, FL 33060
High Velocity Hurricane Zones Uniform Permit Application
Phone: 954.786.4669 Fax: 954.786.4677
Florida Building Code 7
th
Edition 2020
G:\Building\Forms & Documents\2020 Code Items\hv_hurrricane_roof_app2020.doc Page 2 of 6
Section A (General Information)
Master Permit No.________________________________________ Process No. _______________
Contractor’s Name__________________________________________________________________
Job Address_______________________________________________________________________
ROOF CATEGORY
Low Slope
Mechanically Fastened Tile
Mortan/Adhesive Set Tiles
Asphaltic Shingles
Metal Panel/Shingles
Wood Shingles/Shakes
Prescriptive BUR-RAS 150
ROOF TYPE
New Roof
Repair
Maintenance
Reroofing
Recovering
ROOF SYSTEM INFORMATION
Low Slope Roof Area (SF)______
Steep Sloped Roof Area (SF)______
Total (SF)______
Section B (Roof Plan)
Sketch Roof Plan: Illustrate all levels and sections, roof drains, scuppers, overflow scuppers and overflow drains. Include
dimensions of sections and levels, clearly identify dimensions of elevated pressure zones and location of parapets.
City of Pompano Beach
Department of Development Services
Building Inspections Division
100 W. Atlantic Blvd Pompano Beach, FL 33060
High Velocity Hurricane Zones Uniform Permit Application
Phone: 954.786.4669 Fax: 954.786.4677
Florida Building Code 7
th
Edition 2020
G:\Building\Forms & Documents\2020 Code Items\hv_hurrricane_roof_app2020.doc Page 3 of 6
Section C (Low Sloped Roof Systems)
Fill in specific roof assembly components and identify
manufacturer
(If a component is not used, identify as “NA”)
System Manufacturer: ______________________________
Product Approval No.: ______________________________
Design Wind Pressures, From RAS 128 or Calculations:
Zone 1’: _____ Zone 1: _____ Zone 2: _____ Zone 3: _____
Max. Design Pressure, from the specific product
approval system: __________________________________
Deck:
Type:________________________________________
Gauge/Thickness:_____________________________
Slope:_______________________________________
Anchor/Base Sheet & No. of Ply(s): ___________________
Anchor/Base Sheet Fastener/Bonding Material:
_________________________________________________
Insulation Base Layer: _____________________________
Base Insulation Size and Thickness: _________________
Base Insulation Fastener/Bonding Material:
_________________________________________________
Top Insulation Layer: ______________________________
Top Insulation Size and Thickness: __________________
Top Insulation Fastener/Bonding Material:
______________________________________________
Base Sheet(s) & No. of Ply(s): _______________________
Base Sheet Fastener/Bonding Material:
_________________________________________________
Ply Sheet(s) & No. of Ply(s): _________________________
Ply Sheet Fastener/Bonding Material:
________________________________________________
Top Ply: _________________________________________
Top Ply Fastener/Bonding Material:
________________________________________________
Surfacing: _____________________________________
Fastener Spacing for Anchor/Base Sheet Attachment:
Zone 1’: ____” oc @ Lap, # Rows ____ @ ____” oc
Zone 1: ____” oc @ Lap, # Rows ____ @ ____” oc
Zone 2: ____” oc @ Lap, # Rows ____ @ ____” oc
Zone 3: ____” oc @ Lap, # Rows ____ @ ____” oc
Number of Fasteners Per Insulation Board:
Zone 1’: _____ Zone 1:_____ Zone 2:_____ Zone 3:_____
Illustrate Components Noted and Details as Applicable:
Woodblocking, Gutter, Edge Termination, Stripping, Flashing,
Continuous Cleat, Cant Strip, Base Flashing, Counterflashing,
Coping, Etc.
Indicate: Mean Roof Height, Parapet Height, Height of Base
Flashing, Component Material, Material Thickness, Fastener
Type, Fastener Spacing or Submit Manufacturers Details that
Comply with RAS 111 and Chapter 16.
City of Pompano Beach
Department of Development Services
Building Inspections Division
100 W. Atlantic Blvd Pompano Beach, FL 33060
High Velocity Hurricane Zones Uniform Permit Application
Phone: 954.786.4669 Fax: 954.786.4677
Florida Building Code 7
th
Edition 2020
G:\Building\Forms & Documents\2020 Code Items\hv_hurrricane_roof_app2020.doc Page 4 of 6
Section D (Steep Sloped Roof System)
Roof System Manufacturer: ____________________________________________________________
Notice of Acceptance Number: __________________________________________________________
Minimum Design Wind Pressures, If Applicable (From RAS 127 or Calculations):
Zone 1: _____ Zone 2e: _____ Zone 2n: _____ Zone 2r: _____ Zone 3e: _____ Zone 3r: _____
Deck Type:
Type Underlayment:
Insulation:
Fire Barrier:
Fastener Type & Spacing:
Adhesive Type:
Type Cap Sheet:
Roof Covering:
Drip Edge:
Roof Slope:
_______:
12
Ridge Ventilation?
_________________
Mean Roof Height:
_____________
City of Pompano Beach
Department of Development Services
Building Inspections Division
100 W. Atlantic Blvd Pompano Beach, FL 33060
High Velocity Hurricane Zones Uniform Permit Application
Phone: 954.786.4669 Fax: 954.786.4677
Florida Building Code 7
th
Edition 2020
G:\Building\Forms & Documents\2020 Code Items\hv_hurrricane_roof_app2020.doc Page 5 of 6
Section E (Tile Calculations)
For Moment based tile systems, choose either Method 1 or 2. Compare the values of M
r
with the values from M
f
. If the M
f
values
are greater than or equal to the M
r
values, for each area of the roof, then the tile attachment method is acceptable.
Method 1 “Moment Based Tile Calculations Per RAS 127”
(Zone 1:_____ × λ ____ = ____) – Mg: ____ = M
r1
____
Product Approval M
f
__________
(Zone 2e:____ × λ ____ = ____) – Mg: ____ = M
r2e
____
Product Approval M
f
__________
(Zone 2n:____ × λ ____ = ____) – Mg: ____ = M
r2n
____
Product Approval M
f
__________
(Zone 2r:____ × λ ____ = ____) – Mg: ____ = M
r2r
____
Product Approval M
f
__________
(Zone 3e:____ × λ ____ = ____) – Mg: ____ = M
r3e
____
Product Approval M
f
__________
(Zone 3r:____ × λ ____ = ____) – Mg: ____ = M
r3r
____
Product Approval M
f
__________
Method 2 “Simplified Tile Calculation Per Table Below”
Required Moment of Resistance (M
r
) From Table Below: ____________ M
f
Product Approval ___________
M
r
Required Moment Resistance *
Mean Roof Height →
15’ 20’ 25’ 30’ 40’
Roof Slope ↓
2:12
34.4
36.5
38.2
39.7
42.2
3:12
32.2
34.4
36.0
37.4
39.8
4:12
30.4
32.2
33.8
35.1
37.3
5:12
28.4
30.1
31.6
32.8
34.9
6:12
26.4
28.0
29.4
30.5
32.4
7:12
24.4
25.9
27.1
28.2
30.0
*Must be used in conjunction with a list of Moment Based Tile Systems endorsed by the Broward County Board of Rules and Appeals.
For Uplift Based Tile Systems use Method 3. Compare the values for F’ with the values for F
r
. If the F’ values are greater than or
equal to the F
r
values for each area of the roof, then the tile attachment method is acceptable.
Method 3 “Uplift Based Title Calculations Per RAS 127”
(Zone 1: ____ × L ____ = ____ × w: = ____) – W: ____ × cos r ____ = F
r1
____ Product Approval F’ __________
(Zone 2e: ____ × L ____ = ____ × w: = ____) – W: ____ × cos r ____ = F
r2e
____ Product Approval F’ __________
(Zone 2n: ____ × L ____ = ____ × w: = ____) – W: ____ × cos r ____ = F
r2n
____ Product Approval F’ __________
(Zone 2r: ____ × L ____ = ____ × w: = ____) – W: ____ × cos r ____ = F
r2r
____ Product Approval F’ __________
(Zone 3e: ____ × L ____ = ____ × w: = ____) – W: ____ × cos r ____ = F
r3e
____ Product Approval F’ __________
(Zone 3r: ____ × L ____ = ____ × w: = ____) – W: ____ × cos r ____ = F
r3r
____ Product Approval F’ __________
Where to obtain Information
Description
Symbol
Where to Find
Design Pressure Zones 1, 2e, 2n, 2r, 3e, 3r
RAS 127 Table 1 or by an engineering
analysis prepared by PE based on ASCE 7
Mean Roof Height
H
Job Site
Roof Slope
Ө
Job Site
Aerodynamic Multiplier
λ
Product Approval
Restoring Moment due to Gravity
M
g
Product Approval
Attachment Resistance
M
f
Product Approval
Required Moment Resistance
M
g
Calculated
Minimum Attachment Resistance
F’
Product Approval
Required Uplift Resistance
F
r
Calculated
Average Tile Weight
W
Product Approval
Tile Dimensions
L = length W = width
Product Approval
All Calculations must be submitted to the Building Official at the time of permit application.
City of Pompano Beach
Department of Development Services
Building Inspections Division
100 W. Atlantic Blvd Pompano Beach, FL 33060
High Velocity Hurricane Zones Uniform Permit Application
Phone: 954.786.4669 Fax: 954.786.4677
Florida Building Code 7
th
Edition 2020
G:\Building\Forms & Documents\2020 Code Items\hv_hurrricane_roof_app2020.doc Page 6 of 6
Section 1524
HIGH VELOCITY HURRICANE ZONES
REQUIRED OWNERS NOTIFICATION FOR ROOFING CONSIDERATIONS
1524.1 Scope.
As it pertains to this section, it is the responsibility of the roofing contractor to provide the owner with the
required roofing permit, and to explain to the owner the content of this section. The provisions of Chapter 15 of the
Florida Building Code, Building govern the minimum requirements and standards of the industry for roofing system
installations. Additionally, the following items should be addressed as part of the agreement between the owner and the
contractor. The owner’s initials in the designated space indicates that the item has been explained.
1. Aesthetics-workmanship. Reserved.
2. Renailing wood decks. When replacing roofing, the existing wood roof deck may have to be renailed in
accordance with the current provisions of Chapter 16 (High-Velocity Hurricane Zones) of the Florida
Building Code, Building. (The roof deck is usually concealed prior to removing the existing roof system.)
3. Common roofs. Reserved.
4. Exposed ceilings. Exposed, open beam ceilings are where the underside of the roof decking can be
viewed from below. The owner may wish to maintain the architectural appearance; therefore, roofing
nail penetrations of the underside of the decking may not be acceptable. The owner provides the option
of maintaining this appearance.
5. Ponding water. Reserved.
6. Overflow scuppers (wall outlets). It is required that rainwater flow off so that the roof is not overloaded
from a buildup of water. Perimeter/edge walls or other roof extensions may block this discharge if
overflow scuppers (wall outlets) are not provided. It may be necessary to install overflow scuppers in
accordance with the requirements of: Chapters 15 and 16 herein and the Florida Building Code,
Plumbing.
____________________________________ ___________ ________________________________ ___________
Owner’s / Agent’s Signature Date Contractor’s Signature Date
Owner
Initial
Owner
Initial
Owner
Initial
Owner
Initial
Owner
Initial
Owner
Initial
click to sign
signature
click to edit
click to sign
signature
click to edit
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

City of Pompano Beach (City of Pompano Beach)

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 24 February 2021

Message

View Audit Log
Print With Audit Log
Duplicate Document