“THE COMPLETE LIGHTING SOLUTION” VISIT US AT : WWW.LITON.COM PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
lensed LED retro t/remodel downlight
for low to high ceilings with existing
open style frame.
Retro t Mounting
Designed for use with existing 6" Architectural,
Incandescent, Fluorescent, and Metal Halide
Housings like LITON Brand LVH6, and LH600.
Supplied with exible metal conduit for
connection to existing electrical junction
box. Uses existing frame-in-kits mounting
method via clips or heavy duty tension
springs option. Fits Lithonia LP6U, Lightolier
1102P1, Gotham 6" AFV (CJ00263) Frame
using PST041 clips. Consult factory for
special mounting methods.
Use the -JB Junction box option for remodel
applications that don't have an existing
housing frame or an electrical junction box
close by. The retaining spring clips option
allows for mounting to wood or gypsum board
ceilings without the need of a frame.
120V/277V AC 50/60Hz Electronic Direct
Current Class 2. Input current 0.50 Amps
at 115VAC. Power Factor > 0.90. Operating
Temperature: -20ºC to +50ºC / -4ºF to +131ºF.
Accessible from above or below ceiling.
Standard 0-10V works with most 5-wire,
0-10V dimmers. Factory quali ed for use
with Leviton IP710-DLZ.
(UE-DUN) Uni-Dim™ dimming option is
a universal dimming system that works
with most 3-wire ELV, 2-wire incandescent
and 120V/277V 5-wire 0-10V uorescent
(-DIN) dimming option smoothly dims down
to 5% of initial light output with icker-free
performance. Works with standard 120V
(UE-DHL) Lutron HiLume is a 3-wire driver
that that provides smooth, continuous 1%
dimming for virtually any LED xture.
(UE-ECO) Works with Lutron EcoSystem
digital controls. Precision microprocessor
control and integral thermal management
deliver energy savings and extended
(-347) is a 0-10V driver that takes 347V input.
(UE-D10P1) 0-10V dims down to 1% and
works with most 120V/277V, 5-wire, 0-10V
Integral Emergency LED Battery Back-up
available. When AC power fails, the device
immediately switches to the emergency
mode, operating the LEDs for a minimum of
90 minutes. Test switch mounted on re ector
face. Optional Generator Transfer Device
switches the driver to auxiliary generator
power during the loss of normal AC power,
(recommended for applications requiring
individual circuit switching).
Available in 2700K, 3000K, 3500K,
Non-IC rated housing must be kept 3" from
loose- ll insulation. IC-Rated/Airtight (ICA)
option is for direct insulation contact.
LED lamp array is replaceable via on board
quick disconnect terminal. Meets CA Title 24
requirements and other standards restricting
the use of Medium Base or Bi-Pin sockets.
Heat dissipation facilitated by a large
exposed integral aluminum heat sink to
maximize heat dissipation in an open-
air environment. IC Option thermally
engineered to ensure stated L70 LED life
without the need for external box.The
recommended ambient temperature should
be below 35°C to achieve a minimum
L70 life of 50,000 hours according to the
Field adjustable twist and lock re ector is
easily removable to provide quick access
to LED lamp array. Frosted polycarbonate
lens pre-installed on re ector uni es diode
sources and protects diodes from dust and
particles from front of aperture.
Re ector Finish
1-piece, self- anged, dual re ector LED
design enables a clean trim nish without
secondary trim ring. Heavy gauge aluminum
re ector prevents ugly dents during
shipping & installation. Deeply mounted
singular LED provides 50° visual cuto .
Available in Satin Haze Re ector/White
Finish, White Re ector/White Finish, All
Black, Clear Specular Re ector/White Finish,
and All Satin Haze.
(-JB) option is 18-gauge pre-wired aluminum
Junction Box, 18 cubic-inch for a maximum
of (6) #12AWG wires. Furnished with (2) 1/2"
knockouts. Strain clamps to install or remove
covers for easy access and ground wire.
(-JB-CHP) option is Chicago Plenum,
air-tight Junction Box.
IC-Rated/Airtight (ICA) re ector design
is designed to restrict air ow from room
into plenums in compliance to the WSEC -
Washington State Energy Code, (Less than 2.0
CFM -Cubic Feet per Minute).
Certi cations and Listings
cETLus listed. Suitable for dry, damp, and wet
locations. NYC approved. Calendar #41937.
Conforms to City of Chicago Environmental
Air CCEA-200 with Section 18-27-300.22 and
special requirements Section 14-20-210C-4.
Assembled in USA.
26W/32W CFL, 32W/42W CFL, 2 x 26W CFL,
2 x 26W, 2 x 32W.
Fixtures must be grounded in accordance
with national, state and/or local electrical
codes. Failure to do so may result in serious
Covered by a 5-Year Warranty to be free
of defects in materials and craftsmanship.
Recommended for applications where
ambient temperatures do not exceed 35°C.
Installations exceeding this temperature will
result in reduced LED lamp life and a voided
Quick Ship Items
All item options are Quick Ship
Energy Star Quali ed Items
CRTR6L - 6"
LED DOWNLIGHT, RETROFIT/REMODEL, 1000LM - 5300LM (16W-55W)