SENSORS
CONTROLLERS
ACTUATORS
RELIEF VALVES CHECKED
AIR COMPRESSOR
AIR DRYER
OIL/WATER SEPARATOR
PRESSURE TEST
FILTERS, TRAPS
SYSTEM TEST
EXTERIOR OF EQUIPMENT
COMPLETENESS OF ASSEMBLY
EQUIPMENT ROTATION
ELECTRICAL/MECHANICAL INTERLOCKS
INSTRUMENTS
PROPER GROUNDING
PROPER INSULATION
TIGHTNESS OF BOLTED CONNECTIONS
PROPER LUBRICATION
EQUIPMENT IDENTIFICATION
BRACING
LABELING AND TAGGING
SAFETY INTERLOCKS
WORKING SPACE
ANCHORAGE
CONDENSATE DRIP LEGS
COMPARISON TO DRAWINGS
CONTROL SYSTEM
1. PLANT 2. LOCATION 3. JOB NUMBER
4. EQUIPMENT 5. SYSTEM DESIGNATION
6. DATE (YYYYMMDD)
7. TEST EQUIPMENT 8. TESTED BY
9. COMPRESSOR MANUFACTURER 10. MODEL NO 11. SERIAL NO 12. FLOW RATING CFM
16. DRYER MANUFACTURER 18. SERIAL NO
27. NOTES
17. MODEL NO 19. EXIT FLOW RATE @ DPºF
14. HP @ RPM13. TYPE 15. PRESSURE RATING PSIG
20. OIL/WATER SEPARATOR MFG 22. SERIAL NO21. MODEL NO 23. FLOW RATE CFM
COMPRESSED AIR SYSTEM INSPECTION CHECKLIST
For use of this form, see TM 5-697; the proponent agency is COE.
DA FORM 7482-R, DEC 2002
APD LC v1.00
*CONDITION: A=ACCEPTABLE; R=NEEDS REPAIR, REPLACEMENT OR ADJUSTMENT; C=CORRECTED; NA=NOT APPLICABLE
SECTION A - CUSTOMER DATA
SECTION B - EQUIPMENT DATA
SECTION C - VISUAL AND MECHANICAL INSPECTION
COND* NOTESCHECK POINT COND* NOTESCHECK POINT
SECTION D - CALIBRATION AND SET POINT
24.
SECTION E - COMPRESSED AIR SYSTEM TESTS
25.
DESCRIPTION
NOTES
26.
NOTESOPERATING MODES TEMPERATURES PRESSURES FLOWS LEVELS