TYPE:
PROJECT:
PROJECT INFORMATION
CATALOG#:
TYPE
CATALOG#
PROJECT
CH618 - 6" COMMERCIAL DOWNLIGHT - 1500LM
6" COMMERCIAL LED DOWNLIGHTING
6-00"
7-1/2"
7-1/4"
12-1/4"
7-3/4"
Tel: 323.904.0200 Product specifications subject to change without notice. www.liton.com
L I G H T I N G G R O U P
FEATURE:FEATURE:FEATURE:FEATURE:
ORDERING EXAMPLE :ORDERING EXAMPLE :ORDERING EXAMPLE :ORDERING EXAMPLE : CH618UE-D10/CR6L22SW-T30
SPECIFICATIONSPECIFICATIONSPECIFICATIONSPECIFICATION
120/277V 18W LED
Application: Application: Application: Application: Commercial-grade recessed LED downlight housing for medium to high
ceilings in commercial and architectural spaces. Lensed fixture.
Mounting:Mounting:Mounting:Mounting: Housing suitable for new construction installations only, supplied with (2)
24"adjustable hanger bars with 90 degrees repositioning ability. Suitable for wood & metal
joist support systems, and also drywall & T-bar ceilings. Hanger bars equipped with nail-less
install 3/4" serrated barbed studs and with captive nails, for faster and easier secure
mounting in wood joists. Set-screws lock into position and prevent shifting after installation.
Earthquake structural cable compatible for drop panel ceiling or any other mounting that
requires direct support from structural ceilings.
Driver: Driver: Driver: Driver: 120V/277V AC 50/60Hz Electronic Direct Current Class 2 driver integrally mounted
on large access Junction Box. Power Factor > 0.90. Operating Temperature: -20ºC to
+50ºC / -4ºF to +131ºF. Accessible from above or below ceiling.
Dimming: Dimming: Dimming: Dimming: Standard 0-10V dimming works with most 5-Wire 0-10V dimmers. Factory
qualified for use with Leviton IP710-DLX and Lutron NTFTV-WH.
Junction Box:Junction Box:Junction Box:Junction Box: 16 gauge pre-wired galvanized steel double Junction Box, 64 cubic-inch for a
maximum of (8) #12 AWG wires. Furnished with (10) 3/4'', (2) 1" and (8) Romex knock-
outs. Strain clamps to install or remove covers for easy access and ground wire. Equipped
with safety standard die-cast aluminum fitting for flex-conduit.
Airflow:Airflow:Airflow:Airflow: Airtight reflector design is designed to restrict air flow
from room into plenums in compliance to the WSEC -
Washington State Energy Code,
(Less than 2.0 CFM -Cubic Feet
per Minute).
Warranty: Warranty: Warranty: Warranty: Covered by a 5 Year Warranty to be free of defects in
materials and craftsmanship. Recommended for applications
where ambient temperatures do not exceed 35°C, installations
exceeding this temperature will result in reduced LED lamp life
and a voided warranty.
Safety Labels:Safety Labels:Safety Labels:Safety Labels: ETL/cETL listed to UL1598 and UL8750. Suitable
for dry, damp and wet locations. NYC approved: Calendar
#41937.
BenefitBenefitBenefitBenefit:
• Ready2Ship Items Available, check the website for details
• Heavy Duty Self-Flanged Reflector
• Standard with 0-10V Dimming
• Soft Even Lumen Distribution
• 84CRI Standard
• No Visible Screws or Hardware
Ceiling Cut-out: 6-3/8" - Ceiling Thickness: 1" Max
CH618 - 6" COMMERCIAL DOWNLIGHT - 1500LMCH618 - 6" COMMERCIAL DOWNLIGHT - 1500LM
COMPATIBILITYCOMPATIBILITYCOMPATIBILITYCOMPATIBILITY
Note:
Wattage limitations on compatible items must be met.
Reflector Finish: Reflector Finish: Reflector Finish: Reflector Finish: 1 piece, self-flanged, dual reflector LED design
enables a clean trim finish without secondary trim ring. Heavy-
gauge aluminum reflector prevents ugly dents during shipping
installation. Deeply mounted singular LED provides 50 degree
visual cutoff. Available in Haze Reflector/White Ring, White
Reflector/White Ring, All Black and Clear Specular Reflector/
White Ring.
Color Temperature: Color Temperature: Color Temperature: Color Temperature: Available in 2700K, 3000K, 3500K and
4000K.
2020.01.30
*Only available for EM Housings
ROUND VANDAL
RESISTANT KIT FOR 8"
ROUND VANDAL
RESISTANT KIT FOR 8"
ROUND VANDAL
VR800
RESISTANT KIT FOR 8"
VR800VR800
P-CR671W
6" WALL WASH
CR6 ACCESSORY
P-CR671W
6" WALL WASH
CR6 ACCESSORY
P-CR671W
6" WALL WASH
CR6 ACCESSORY
P-CR671W
6" WALL WASH
CR6 ACCESSORY
CR6-GSKT
6" COMMERCIAL
SELF-ADHESIVE GASKET
CR6-GSKTCR6-GSKT
6" COMMERCIAL
SELF-ADHESIVE GASKET
Emergency Options: Emergency LED Battery Back-up available, remotely mounted adjacent
to housing by installer. When AC power fails, the device immediately switches to the
emergency mode, operating the LEDs for a minimum of 90 minutes. Remote test switch and
plate cover included. Optional Generator Transfer Device switches the driver to auxiliary
generator power during the loss of normal AC power, (recommended for applications
requiring individual circuit switching).
Emergency Options: Emergency Options: Emergency Options:
Damp Location
Emergency Back Up
Wet Location
277V120V
Energy Star
Dedicated LED
Trim: Frosted Polycarbonate Lens pre-installed on reflector unifies diode sources and
protects diodes from dust and particles from front of aperture.
Trim:Trim:Trim:Trim:
UE-D10UE-D10UE-D10UE-D10
UE-D10-GTDUE-D10-GTDUE-D10-GTDUE-D10-GTD
:0-10V Dimming
:GTD Device
UE-D10-CHP :Chicago Plenum
HOUSING OPTION HOUSING OPTION HOUSING OPTION HOUSING OPTION
Blank
ICA
:Non-IC
:ICA Rated
IC OPTION
/CR6L22SW /CR6L22SW /CR6L22SW /CR6L22SW
/CR6L22WW/CR6L22WW/CR6L22WW/CR6L22WW
/CR6L22BBF/CR6L22BBF
:Haze Reflector/White Ring
:White Reflector/White Ring
:All Black
/CR6L22CW :Clear Specular Reflector/
White Ring
REFLECTOR FINISH REFLECTOR FINISH REFLECTOR FINISH REFLECTOR FINISH
-T30
-T30
-T30
-T30
-T35
-T35
-T35
-T35
-T40
-T40
-T40
-T40
:3000K
-T27-T27 :2700K
:3500K
:4000K
COLOR TEMPERATURE COLOR TEMPERATURE COLOR TEMPERATURE COLOR TEMPERATURE
/CR6L22CW
Blank
-EMA
:None
:Integral EM-Switch*
REFLECTOR OPTION
UE-D10-CHP
UE-D10-EM :12W Emergency Back-Up
:25W Emergency Back-Up UE-D10-EMAC
UE-D10-EM
UE-D10-EMAC
UE-D10-EM
UE-D10-EMAC
Blank
-EMA
REFLECTOR OPTION
Blank
-EMA
REFLECTOR OPTION
CH618
CH618 :1500lm (18W)
Blank
ICA
CH618
CH618
IC Rated
Insulation Contact:Insulation Contact:Insulation Contact:Insulation Contact: Non-IC rated housing must be kept 3" from insulation. IC rated option
rated for direct insulation contact.
.sgnisuoH DEL gniretne rewop eht no srotcetorp egrus fo esu sdnemmocer NOTIL :noituaC :noituaC :noituaC :noituaC
Surge damage is not covered by warranty. (+1KV)
Power Connection: Power Connection: Power Connection: Power Connection: LED lamp array is replaceable via on board quick disconnect terminal.
Meets CA Title 24 Requirements and other standards restricting the use of Medium Base or
Bi-Pin Sockets.
Thermal Management:Thermal Management:Thermal Management:Thermal Management: Heat dissipation facilitated by the exposed integral aluminum heat
sink to maximize heat rejection in an open-air environment.The recommended ambient
temperature should be below 35°C to achieve a minimum L70 life of 50,000 hours according
to the LM80 standard.
