CALCULATING YOUR WATER AND SEWER BILL
Both your water and sewer charges are based on
the number of cubic feet of water consumed by your household
during the month. This is shown on your statement. The water rate per hundred cubic feet shown below is for
up to 30 CCF per month. The sewer rate per hundred cubic feet does not vary by the quantity of water used.
FOR EXAMPLE: If you used 500 cubic feet of water, the number would show as 5CCF,
1,000 would be shown at 10 CCF, etc. You can compute your water and
sewer bill by following these steps:
WATER
1. TAKE the number of Hundred Cubic Feet (CCF) you have consumed.
This is shown on your statement as (“Consumption”) ....................... ________ CCF
2. MULTIPLY this by per hundred cubic feet ................. x 2.73
SUBTOTAL .......................... =
3. ADD to this SUBTOTAL , the basic billing charge .............. + 3.75
TOTAL -Water................... =
SEWER
1. TAKE the number of Hundred Cubic Feet (CCF) you have consumed.
This is the same number you used to calculate water charges .............. _________ CCF
2.
MULTIPLY this by per hundred cubic feet ...................... x
(Round to the nearest cent) SUBTOTAL ..........................
3. ADD to this SUBTOTAL
the basic billing charge ..................
TOTAL-Sewer......................
YOUNGSTOWN RESIDENTIAL HOUSEHOLD
Disclaimer: The totals calculated on this worksheet might vary +\- $.01 to $.10 from your actual bill.
Year
2019 2020 2021 2022 2023 2024
Choose a Year
SANITATION
TOTAL - Sanitation.............
GRAND TOTAL............