Fill - Free fillable ASSURANCE OF PROFESSIONAL DESIGN AND SCHEDULE B COMMITMENT PDF form

- –BUILDING BY- LAW 2019 - CITY OF VANCOUVER

CITY OF VANCOUVER

Professional’s Seal

and Signature

SCHEDULE B

ASSURANCE OF PROFESSIONAL DESIGN AND

COMMITMENT FOR FIELD REVIEW

Forming Part of Subsection 2.2.7., Division C of the

Building By-law

Certified Professional’s

Stamp and Signature

(if applicable)

Notes:

i) This letter must be submitted prior to the commencement of construction activities of the components identified below.

A separate

letter must be submitted by each registered professional of record.

ii) This letter is

endorsed by: Architectural Institute of B.C. and the Association of Professional Engineers and Geoscientists of the

Province of British Columbia.

To: The Chief Building Official

Re: _________________________________________

Name of Project (Print)

_________________________________________

Address of Project (Print)

_________________________________________

Components of the plans and supporting documents prepared by this registered professional in support of the application for

the building permit as outlined below substantially comply with the Building By-law and other applicable enactments respecting

safety except for construction safety aspects.

The undersigned hereby undertakes to be responsible for field reviews of the above referenced components during

construction as indicated on the ‘‘SUMMARY OF DESIGN AND FIELD REVIEW REQUIREMENTS’’ below.

________________

CRP’s Initials

1 of 4

The undersigned hereby gives assurance that the design of the

(Initial those of the items listed below that apply to this registered professional

of record. All the disciplines will not necessarily be employed on every project.)

____________ ARCHITECTURAL

____________ STRUCTURAL

____________ MECHANICAL

____________ PLUMBING

____________ FIRE SUPPRESSION SYSTEMS

____________ ELECTRICAL

____________ GEOTECHNICAL — temporary

____________ GEOTECHNICAL — permanent

Building Permit No._______________

(for Building Official’s use)

- –BUILDING BY- LAW 2019 - CITY OF VANCOUVER

CITY OF VANCOUVER

Professional’s Seal

and Signature

SCHEDULE B - continued

Certified Professional’s

Stamp and Signature

(if applicable)

(If the Registered Professional of Record is a member of a firm, complete the following.)

I am a member of the firm _______________________________________________________________________

(Print name of firm)

and I sign this letter on behalf of the firm.

Note: The above letter must be signed by registered professional of record, who is a registered professional.

The Building By-law defines a registered professional to mean

(a) a person who is registered or licensed to practise as an architect under the Architects Act, or

(b) a person who is registered or licensed to practise as a professional engineer under the Engineers and

Geoscientists Act.

________________

CRP’s Initials

2 of 4

_____________________________

Project Address

_____________________________

Discipline

The undersigned also undertakes to notify the Chief Building Official in writing as soon as possible if the undersigned’s contract

for field review is terminated at any time during construction.

I certify that I am a registered professional as defined in the Building By-law.

_________________________________________

Registered Professional’s Name (Print)

__________

_______________________________

Address (Print)

_________________________________________

Phone No. and Email address

Building Permit No._______________

(for Building Official’s use)

- –BUILDING BY- LAW 2019 - CITY OF VANCOUVER

CITY OF VANCOUVER

SCHEDULE B - continued

______ MECHANICAL

3.1 HVAC systems and devices, including high building requirements where applicable

3.2 Fire dampers at required fire separations

3.3 Continuity of fire separations at HVAC penetrations

3.4 Functional testing of mechanically related fire emergency systems and devices

3.5 Maintenance manuals for mechanical systems

3.6 Structural capacity of mechanical components, including anchorage and seismic restraint

3.7 Review of all applicable shop drawings

3.8 Mechanical systems, Part 10 requirements (ASHRAE, NECB, ZEBP, etc)

__________________

CRP’s Initial

3 of 4

__________________________

Project Address

__________________________

Discipline

SUMMARY OF DESIGN AND FIELD REVIEW REQUIREMENTS

(Initial applicable discipline below and cross out and initial only those items not applicable to the project.)

_______ ARCHITECTURAL

1.1 Fire resisting assemblies

1.2 Fire separations and their continuity

1.3 Closures, including tightness and operation

1.4 Egress systems, including access to exit within suites and floor areas

1.5 Performance and physical safety features (guardrails, handrails, etc.)

1.6 Structural capacity of architectural components, including anchorage and seismic restraint

1.7 Sound control

1.8 Landscaping, screening and site grading

1.9 Provisions for firefighting access

1.10 Access requirements for persons with disabilities

1.11 Elevating devices

1.12 Functional testing of architecturally related fire emergency systems and devices

1.13 Development Permit and conditions therein

1.14 Interior signage, including acceptable materials, dimensions and locations

1.15 Review of all applicable shop drawings

1.16 Interior and exterior finishes

1.17 Dampproofing and/or waterproofing of walls and slabs below grade

1.18 Roofing and flashings

1.19 Wall cladding systems

1.20 Condensation control and cavity ventilation

1.21 Exterior glazing

1.22 Integration of building envelope components

1.23 Environmental separation requirements (Part 5)

1.24 Building envelope, Part 10 requirements (ASHRAE, NECB, ZEBP, etc)

Building Permit No._______________

(for Building Official’s use)

Professional’s Seal

and Signature

Certified Professional’s

Stamp and Signature

(if applicable)

_______ STRUCTURAL

2.1 Structural capacity of structural components of the building, including anchorage and seismic restraint

2.2 Structural aspects of deep foundations

2.3 Review of all applicable shop drawings

2.4 Structural aspects of unbonded post-tensioned concrete design and construction

- –BUILDING BY- LAW 2019 - CITY OF VANCOUVER

CITY OF VANCOUVER

SCHEDULE B - continued

__________________________

Project Address

__________________________

Discipline

_______

PLUMBING

4.1 Roof drainage systems

4.2 Site and foundation drainage systems

4.3 Plumbing systems and devices

4.4 Continuity of fire separations at plumbing penetrations

4.5 Functional testing of plumbing related fire emergency systems and devices

4.6 Maintenance manuals for plumbing systems

4.7 Structural capacity of plumbing components, including anchorage and seismic restraint

4.8 Review of all applicable shop drawings

4.9 Plumbing systems, Part 10 requirements (ASHRAE, NECB, ZEBP, etc)

4.10 Plumbing systems, testing, confirmation

_______

FIRE SUPPRESSION SYSTEMS

5.1 Suppression system classification for type of occupancy

5.2 Design coverage, including concealed or special areas

5.3 Compatibility and location of electrical supervision, ancillary alarm and control devices

5.4 Evaluation of the capacity of city (municipal) water supply versus system demands and domestic demand,

including pumping devices where necessary

5.5 Qualification of welder, quality of welds and material

5.6 Review of all applicable shop drawings

5.7 Acceptance testing for ‘‘Contractor’s Material and Test Certificate’’ as per NFPA Standards

5.8 Maintenance program and manual for suppression systems

5.9 Structural capacity of sprinkler components, including anchorage and seismic restraint

5.10 For partial systems — confirm sprinklers are installed in all areas where required

5.11 Fire Department connections and hydrant locations

5.12 Fire hose standpipes

5.13 Freeze protection measures for fire suppression systems

5.14 Functional testing of fire suppression systems and devices

_______ ELECTRICAL

6.1 Electrical systems and devices, including high building requirements where applicable

6.2 Continuity of fire separations at electrical penetrations

6.3 Functional testing of electrical related fire emergency systems and devices

6.4 Electrical systems and devices maintenance manuals

6.5 Structural capacity of electrical components, including anchorage and seismic restraint

6.6 Clearances from buildings of all electrical utility equipment

6.7 Fire protection of wiring for emergency systems

6.8 Review of all applicable shop drawings

6.9 Electrical systems, Part 10 requirements (ASHRAE, NECB, ZEBP, etc)

6.10 Electrical systems, testing, confirmation

6.11 Radio Antenna Systems

_______

GEOTECHNICAL — Temporary

7.1 Excavation

7.2 Shoring

7.3 Underpinning

7.4 Temporary construction dewatering

_______

GEOTECHNICAL — Permanent

8.1 Bearing capacity of the soil

8.2 Geotechnical aspects of deep foundations

8.3 Compaction of engineered fill

8.4 Structural considerations of soil, including slope stability and seismic loading

8.5 Backfill

8.6 Permanent dewatering

8.7 Permanent underpinning

__________________

CRP’s Initial

4 of

Building Permit No._______________

(for Building Official’s use)

Professional’s Seal and

Signature

Certified Professional’s

Stamp and Signature

(if applicable)

Download
Save PDF to desktop

Email
Email completed PDF

Send for Signing
Email for others to sign

Print
Print document

NAME

ASSURANCE OF PROFESSIONAL DESIGN AND SCHEDULE B COMMITMENT

View Audit Log
Print With Audit Log
Duplicate Document

Fill Online, Printable, Fillable, Blank ASSURANCE OF PROFESSIONAL DESIGN AND SCHEDULE B COMMITMENT Form

Related forms

Fillable ASSURANCE OF PROFESSIONAL DESIGN AND SCHEDULE B COMMITMENT

Fill Online, Printable, Fillable, Blank ASSURANCE OF PROFESSIONAL DESIGN AND SCHEDULE B COMMITMENT Form

Related forms

First 20 documents completely FREE!