Fill - Free fillable 369841 DIN Switching Power Module SPEC (369841) PDF form

DIN Power Module

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

myRoom Low Capacity Switching

369841c 1 11.29.18

DIN Power Module - Switching

The Switching Power Module family is a group of

modular products for the control of lighting loads. This

product is compatible with Lutron myRoom

guestroom

systems only.

Features

• ContactClosureInput(CCI)forintegrationwith

magneticdoorswitchorkeycard(myRoomPlusonly).

• ContactClosureOutput(CCO)forintegrationwith

room thermostat or controlled receptacles via

contactor.

• Adaptivezero-crossswitchingmaximizesrelaylife.

Activityadaptstovariationsinrelaytiming.

• RatedforlightingloadsasdefinedbyIEC/EN60669,

NEMA410,aswellasINC,LED,MLV,andELV.

• IncludesQSlinkforseamlessintegrationoflights,

motorizedwindowtreatments(myRoomPlusonly),and

control stations.

• Provides4PowerDrawUnits(PDUs)topowerQS

devicesontheQSlink.

• LEDsonthemoduleprovidediagnosticinformation.

• Buttonsonmoduleprovideloadoverridecontrol.

• Powerfailurememory.

Models Available *

Model Number Maximum Input Current Input Voltage Outputs

MQSE-4S1-D 4A 100–120V~,220–240V~50/60Hz 1Aperoutput,4outputs

MQSE-3S1-D 3A 120–240V~50/60Hz 1Aperoutput,3outputs

MQSE-2S1-D 2A 120–240V~50/60Hz 1Aperoutput,2outputs

*Notallmodelsareavailableinallcountries.

System Compatibility and Limitations:

The models listed are compatible with both myRoom Prime and myRoom Plus lighting control systems. Please

note that the capabilities and limitations of the Prime and Plus versions of the myRoom system are different. For a

listofthesystemrulesandthecapabilitydifferencesbetweenPrimeandPlus,pleaseseetheLutronSystemRules

SpecificationSubmittalat:http://www.lutron.com/TechnicalDocumentLibrary/369821_Lutron_Residential_and_

Commerical_System_Rules.pdf

MQSE-4S1-D (shown)

DIN Power Module

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

myRoom Low Capacity Switching

369841c 2 11.29.18

DimmingPowerModule

System Example - myRoom Prime

GCU-HOSP

(forsetuponly)

Assembled in U.S.A.

50015757 Rev. A

GCU-HOSP

Guestroom Control Unit

+ 44.(0)20.7680.4481

+1.800.523.9466

lutron.com

243C IND. CONT. EQ.

IEC PELV/ NEC Class 2

+−

myRoom

Output |

Salida |

Sortie :

24 V- 1 A

30 PDU Max.

50 - 60 Hz

0.3 - 0.8 A

Input | Entrada | Entree :

120 - 240 V~

COM

MUX

24 V-

Zn. 1Prog. Zn. 2 Zn. 3 Zn. 4

NNNN

DL1DL2 DL3DL4

100

120 V~

220

240 V~

60 Hz 4 A

220

240 V~

60 Hz 4 A

1 A x 4, 1 AX x 4

myRoom

MQSE-4A1-D

lutron.com

24 V- 132 mA

QSLink

Switching

Power

Module

To additional

QSdevices

WirelessCommunication

QSSensorModule(QSM)

QSPower

Supply(optional)

Radio Powr Savr

OccupancySensor

(upto10perQSM)

Pico

WirelessController

(upto10perQSM)

MultipleQSSensorModulescanbeadded

to increase the number of wireless inputs

and Pico wireless controllers.

3rdPartyMagnetic

DoorSwitch

CCI

CCO

Room Thermostat

(LR-HVAC-230-S)

3rdParty

Thermostat

DIN Power Module

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

myRoom Low Capacity Switching

369841c 3 11.29.18

Assembled in U.S.A.

50015757 Rev. A

GCU-HOSP

Guestroom Control Unit

+ 44.(0)20.7680.4481

+1.800.523.9466

lutron.com

243C IND. CONT. EQ.

IEC PELV/NEC Class 2

+−

myRoom

Output |

Salida |

Sortie :

24 V- 1 A

30 PDU Max.

50 - 60 Hz

0.3 - 0.8 A

Input | Entrada | Entree :

120 - 240 V~

System Example - myRoom Plus

Guestroom

ControlUnit

Hotel

Network

Property Management System

(PMS)

Lutron Property Management

System(PMS)InterfaceSoftware

BuildingManagementSystem

(BMS)

Room Thermostat

(LR-HVAC-230-S)

Switching Power Module QS

Wallstation

QS

Wallstation

QSSensor

Module(QSM)

Palladiom

Thermostat

SivoiaQS

MotorizedShades

AlenaQS

MotorizedDrapery

Door

Chime

Window

Switch

Contact

Door

Switch

Contact

CorridorI/O

Wireless

Communication

Radio Powr Savr

OccupancySensor

(upto10perQSM)

Pico

WirelessController

(upto10perQSM)

MultipleQSSensorModulescanbeadded

to increase the number of wireless inputs

and Pico wireless controllers.

QSPower

Supply(optional)

To additional

QSdevices

DIN Power Module

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

myRoom Low Capacity Switching

369841c 4 11.29.18

Specifications

Regulatory Approvals

• UL

® Listed

• cULListed

• NOMCertified

• RoHSCompliant

• IEC/EN60669(220-240V~50/60Hzonly)

• RoHSCompliant

• LutronQualitySystemsregisteredtoISO9001.2015

Power

• SeeModelNumbertableonpage1

• Singleinputfeed

• 4Amaximuminputcurrent

• LightningstrikeprotectionmeetsANSI/IEEEstandard

C62.41andIEC61000-4-5.Canwithstandvoltagesurges

upto6000V~andcurrentsurgesupto3000A.

• Standbypower:<3W

(wireddevicesonQSlinkexcluded)

• Provides4PDUstopowerQSdevicesonQSlink

• ESD-protectionexceedsagencyrequirementsper

IEC-61000-4-2

• QSLinkoutput:24V-

• Forungroundeddeltafeedapplications,contactLutron.

Environment

• Forthermalspecifications,seeMounting section

• Relativehumidity:lessthan90%non-condensing

• Forindooruseonly

Terminals

• Mainswiring: 1.0 mm² to 2.5 mm² (18AWGto12AWG)

(singlewire,solidorstranded)

• CCI/CCOwiring:

0.5 mm² to 2.5 mm² (22AWGto12AWG)

(singlewire,solidorstranded)

• Zonewiring: 1.0 mm² to 2.5 mm² (18AWGto12AWG)

(singlewire,solidorstranded)

• QSLink: 0.5 mm² to 2.5 mm² (22AWGto12AWG)

(singlewire,solidorstranded)

Manual Mode Operation

• Zonebuttonontheunitcanbeusedtoturnloadsonand

off

Output Zone Ratings

• Eachzoneisratedat1Aforswitching.Ratedfor

resistive,inductive,orcapacitivelightingloadsasdefined

byIEC/EN60669,NEMA410.

• Airgapispresentforeachoutputwhenloadis

switched off.

• Nominimumloadperoutput.

• Thismoduleisdesignedtocontrolloadswithratings

asnotedinthetablebelow.Outputscannotbeusedto

control general purpose receptacles.

• Specialconsiderations:

 -Whencontrollinglamps,Lutronrecommendsusing

permanentlyinstalledfixtures.

 -Ifcontrollingplug-inlamps,installationmustensurea

methodofpreventingnon-ratedloadsbeingplugged

intotheunit.Anexampleisadedicatedreceptacle

with an alternate plug type.

 -Controllingloadsoutsidethetablebelowwilldamage

the device and void the warranty.

• Ifattemptingtocontrolgeneralpurposereceptacles,

usetheappropriatethird-partycontactor/powerpack

for the rated load.

• Runaseparateneutralforeachloadcircuit.Acommon

neutral connection is not recommended.

• UnitmaybepoweredbyGroundFaultInterrupter(GFI)

orResidualCurrentCircuitBreakerwithOverload

(RCBO)protectedcircuitifrequired.

• Forapplicationsrequiringhigherwattageratings,use

PHPM-SW-DV-WH,GRX-TVI,orLQSE-4S10-D.

Load Type

Relay Ratings

100–240 V~

Tungsten

1A

ACGeneralUse 1A

ElectricDischargeLamp 1A

ElectricBallast

(NEMA410)

1A

Resistive 1A

Inductive 1A

LED 1A

Motor

1A

Whenusingtungstenloads,lampsshouldbefromareputable

manufacturerandbefused.LutronrecommendsusinganIEC

60127-2compliant2Aexternalfuseforeachoutputthatisusing

tungstenloads.PleaseseeApplicationNote048566for

additional information.

Twomotorsmaxpermodule.

DIN Power Module

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

myRoom Low Capacity Switching

369841c 5 11.29.18

Inductive

Load

FlybackDiode

(requiredfor

inductiveloads)

CCOOutput

N.O. N.C.

COM

–

24V-

maximum

Specifications - (continued)

Contact Closure Input (CCI)

• TheCCIisconfiguredasaninputfromamagneticdoor

switch.

• Switchingmoduledeterminesroom

occupied/unoccupiedstatusbasedonoccupancy

sensorinput(e.g.-RadioPowrSavrassociatedtoa

QSM)andmagneticdoorsensor/switch.

 – Occupiedstate:Allorsomezoneswillturnontoa

fixedlightlevel.

 – Unoccupiedstate:AllzoneswillgotoOffstate.

• Acceptmaintainedinputs.

• Acceptmomentaryinputswith40msecminimumpulse

times.

• Off-stateleakagecurrentmustbelessthan100µA.

• Opencircuitvoltage:24V-maximum.

• Inputsmustbedrycontactclosure,solidstate,

opencollector,oractive-low(NPN)/activehigh

(PNP)output.

 – OpencollectorNPNoractive-lowon-statevoltage

mustbelessthan2V-andsink3.0mA.

 – OpencollectorPNPoractive-highon-statevoltage

mustbegreaterthan12V-andsource3.0mA.

Contact Closure Output (CCO)

• TheCCOoutputhasNormallyOpenandNormally

Closedoutputs.

• InamyRoomPrimesystem,itisusedforthermostat

setbackorreceptaclecontrol(mustbeusedin

conjunction with an occupancy sensor and magnetic

doorsensor/switch).Otheroptionsareavailableina

myRoom Plus system.

– Occupiedstate:N.O.CCOcloses

(N.C.CCOopens).

– Unoccupiedstate:N.O.CCOopens

(N.C.CCOcloses).

• Acceptsvoltagesof0–24V~/0–24V-; see chart

below for load switching capacities:

Switching Voltage

Resistive Load

0–24V- 1.0A

0–24V~ 0.5A

• Default:Maintainedoutputtype.

• Outputrelayisnon-latching(Ifrelayisclosedand

powerislost,relaywillopen).

• TheCCOisnotratedtocontrolunclamped,inductive

loads.Inductiveloadsinclude,butarenotlimitedto,

relays,solenoids,andmotors.Tocontrolthesetypes

ofequipment,aflybackdiode(notincluded)mustbe

used(DCvoltagesonly).Seediagrambelow.

DIN Power Module

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

myRoom Low Capacity Switching

369841c 6 11.29.18

Mechanical Dimensions

60.6mm

(2.38in)

89.7mm

(3.53in)

161.7mm

(6.37in)

Mounting

•MountinIP20(minimum)ratedconsumerpanelor

breakerpanelwithintegratedDINrail.

•ForUnitedStatesandCanada,useNEMAType1

minimum rated enclosure.

•Unitis9DIN(161.7mm[6.37in])wide.

•Mountinanaccessibleandserviceablelocation.

•UnitmaybemountedbypressingtheunitontotheDIN

railwiththeclipslocked.ToremovetheunitfromtheDIN

rail,unlocktheclipsusingascrewdriver.

•SeeLutronP/N048466atwww.lutron.comformore

information on mounting and installation in panels with

integratedDINrail.

•MountthePowerModulewhereaudiblenoiseis

acceptable(internalrelaysclick)

• Unitgeneratesheat,maximum24BTUs/hr.

•Mountunitsuchthatalltheconditionsbelowaremet:

 –Roomambienttemperatureisbetween0ºCand40ºC

(32ºFand104ºF).

 –Temperatureinsidemountingpanel,within20mm

(0.80in)ofunit,isbetween0ºCand40ºC

(32ºFand104ºF).

 –Calibrationpointmaximum:65ºC(149ºF).

Mountingclips(4)onunit

Locked Unlocked

DIN Power Module

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

myRoom Low Capacity Switching

369841c 7 11.29.18

Wiring from Distribution to Switching Power Module

•TurnoffallcircuitbreakersorisolatorsfeedingtheSwitchingPowerModuleatthedistributionpanel.

•Runline/hotandneutralwiresfroma100–120V~ / 220–240V~50/60HzfeedtotheSwitchingPower

Module unit.

•Runaseparateneutralforeachloadcircuit.Acommonneutralconnectionisnotrecommended.

•AllloadsshouldbefullywiredandtestedforshortcircuitsBEFOREconnectingtothemodule.

Mains Wiring and IEC SELV / NEC

® Class 2 Separation

•Followappropriatelocalandnationalcodestoavoidviolatingrequiredseparationguidelines.

Wiring: Mains and Output Zones

Zone1

Zone2

Zone3

Zone4

Mains

Neutral

Outputs

DistributionPanel

100–120V~/ 

220–240V~

Hot/Line

Neutral

To additional

modules

Note:IffeedingthroughLutron

modulesusingmainsterminals,

total current must be less than or

equalto15A.

DIN Power Module

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

myRoom Low Capacity Switching

369841c 8 11.29.18

Wiring: Contact Closure Input/

Contact Closure Output

(continued)

IEC SELV/NEC

® Class 2 Contact

Closures

• ContactClosureInput(CCI)/Contact

ClosureOutput(CCO)wiringisIECSELV/

NEC

®Class2.Followallapplicablenational

and local codes for proper circuit separation

and protection.

CCIWiring

Device Wiring

CCOWiring

N.O. Wiring OR N.C. Wiring

3rdPartyMagnetic

DoorSensor

RoomThermostatorthird-partydevice

(e.g.,contactorforreceptaclecontrol)

CCO(N.O.)

CCO(N.C.)COM

COMCCI

DeviceWiring

DIN Power Module

SPECIFICATION SUBMITTAL Page

Job Name:

Job Number:

Model Numbers:

myRoom Low Capacity Switching

369841c 9 11.29.18

Wiring: QS Link

IEC SELV/NEC® Class 2 QS Link Wiring

• LinkcommunicatesusingIECSELV/NEC

®Class2

wiring.

• Followallapplicablenationalandlocalcodesfor

proper circuit separation and protection.

• TurnoffallbreakersorisolatorsfeedingtheSwitching

Power Module before servicing.

• Wiringmaybet-tappedordaisy-chained.

• TotallengthofQSlinkmustnotexceed610m

(2000ft).

– FortheLutronAll-In-Onecablespecification,see

LutronP/N369596,369597,or3691078on

www.lutron.com.

• Controlpowerlink(COM,24V-)wiring:

– Forlengthsunder150m(500ft),use1.0mm

(18AWG)conductors.

– Forlengthsover150m(500ft),use4.0mm

(12AWG)conductors.

• Datalink(MUX,MUX)wiring:

– Useone,twisted-shieldedpairof1.0mm

– Alternatedata-onlycable:useapproveddatalink

cable(0.5mm

[22AWG]twisted,shielded)from

Belden,model#9461.

• EachQSlinkIECSELV/NEC

®Class2terminalwill

acceptuptotwo1.0mm

(18AWG)wires;two

4.0mm

(12AWG)wireswillnotfit.Ifusingtwo

4.0mm

(12AWG)wires,connectusingappropriate

wire connectors.

Note:FormoreinformationonPDUs,referto“Power

DrawUnitsontheQSLink”document(Lutron

P/N369405).

Control Link

Data Link

1:COM

2:24V-

3:MUX

4:MUX

)Lutron,Lutron,Palladiom,Pico,Alena,andSivoiaaretrademarksofLutronElectronicsCo.,Inc.,registeredintheU.S.andothercountries.

myRoomandRadioPowrSavraretrademarksofLutronElectronicsCo.,Inc.

ULisatrademarkofULLLC.

NECisaregisteredtrademarkofNationalFireProtectionAssociation,Quincy,Massachusetts.

NEMAistheregisteredtrademarkandservicemarkoftheNationalElectricalManufacturersAssociation

Fill Online, Printable, Fillable, Blank 369841 DIN Switching Power Module SPEC (369841) Form

Related forms

Fillable 369841 DIN Switching Power Module SPEC (369841)

Fill Online, Printable, Fillable, Blank 369841 DIN Switching Power Module SPEC (369841) Form

Related forms

First 20 documents completely FREE!