SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Maestro Occupancy / Vacancy Sensor with LED
+
Dimmer Sensor
369748e 2 03.10.20
Specifications
Regulatory Approvals
• UL Listed to U.S. and Canadian safety requirements
• Title 20 / 24 certified lighting control device
– Complies with Title 20 and Title 24 Section 119
(Until Jan 1st, 2014)
• Title 20 / 24 certified lighting control device
– Complies with Title 20 and Title 24 Section 110.9
(After Jan 1st, 2014)
• NOM Certified
Power
• Operating voltage: 120 V~ 60 Hz
Environment
• Ambient operating temperature: 32 °F to 104 °F
(0 °C to 40 °C), 0%-90% humidity, non-condensing;
indoor use only
Warranty
• 5 Year Limited Warranty
For additional Warranty information, please visit:
www.lutron.com/TechnicalDocumentLibrary/Sensor_
Warranty.pdf
Key Design Features
Dimmer
• On a single-tap, lights fade ON or OFF
• On a double-tap, lights go to full ON
• When ON, press and hold to engage a long fade
to OFF
• Light levels can be fine-tuned by pressing and
holding the dimming rocker until the desired light
level is reached
Custom Sensor Settings
Timeout Options
• 1 Minute
• 3 Minute
• 5 Minutes (default)
• 15 Minutes
• 30 Minutes
• Test Mode
– Short (less than 15-second) timeout for testing
sensor coverage. After entering, device will exit
test mode automatically after 5 minutes, or
when any button is pressed.
Sensitivity Options
• High sensitivity (default)
• Low sensitivity
Auto-ON Options
• Occupancy (default): Auto-ON / Auto-OFF
– Occupancy Mode is also called “Auto-On: Enabled”
• Vacancy *: Manual-ON / Auto-OFF
– Vacancy Mode is also called “Auto-On: Disabled”
* There is a 15-second grace period that begins when the lights are
automatically turned off, during which the lights will automatically turn
back on in response to motion. This grace period is provided as a safety
and convenience feature in the event that the lights turn off while the
room is still occupied, so that the user does not need to manually turn the
lights back on. After 15 seconds, the grace period expires and the lights
must be manually turned on.
• Ambient Light Detection (ALD): Lights turn on only if
natural light in room is low
– Smart—Ambient light threshold adjusts to the
user’s preference **
** If sensor turns on when there is enough natural light, or if sensor does
not turn on when there is not enough natural light, press the large button
within 5 seconds of entering the room. Over time, this interaction will
“teach” the sensor your preferred setting.
• Off While Occupied (OWO)
– When the sensor dimmer is manually turned off,
the sensor dimmer will not turn the lights back on
automatically while the room is occupied.
– Once the room is vacated, the Auto-ON feature
returns to normal operation after the timeout period
has expired.
– This may be the preference in conference rooms
or classrooms while viewing presentations. This
feature requires motion to keep the lights off.
Occupied Level Options
Occupied Level is the light level that the sensor
dimmer will turn ON to when motion is detected.
• 100% (default)
• 50%
• Preset
– While in preset mode, lights will automatically turn
to the last level or to the “Locked Preset” level if a
“Locked Preset” has been selected in Advanced
Programming.
