Fillable 2012 Irc Planreview Int (Sussex County, Virginia)

Fill Online, Printable, Fillable, Blank 2012 Irc Planreview Int (Sussex County, Virginia) Form

Use Fill to complete blank online SUSSEX COUNTY, VIRGINIA (VA) pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

2012 Irc Planreview Int (Sussex County, Virginia)

On average this form takes 140 minutes to complete

The 2012 Irc Planreview Int (Sussex County, Virginia) form is 18 pages long and contains:

0 signatures
0 check-boxes
558 other fields

Country of origin: US
File type: PDF

U.S.A. forms for Sussex County, Virginia

BROWSE SUSSEX COUNTY, VIRGINIA (VA) FORMS

Related forms

Form 2016: 762 RETURN OF TANGIBLE PERSONAL PROPERTY, (Sussex County, Virginia)

Fill has a huge library of thousands of forms all set up to be filled in easily and signed.

Fill in your chosen form

Sign the form using our drawing tool

Send to someone else to fill in and sign.

find another form

-2-

CORRECTION LIST (cont’d.)

No. DESCRIPTION

Code

Section

-3-

NOTE: Entries to this Plan Review Record that require a field check or inspection of the installation must be coordinated with the inspection phase (R109) of the project.

BUILDING PLANNING (Chapter 3)

DESIGN CRITERIA [Table R301.2(1)]

Floor live load

(Table R301.5)

________________psf

Roof live load

(Table R301.6)

_________________psf

Ground snow load _________________________psf

Basic wind speed ________________________ mph

Wind exposure category

(R301.2.1.4)

_____ _______

High wind design criteria applicable

(R301.2.1.1)

_____________________________

Seismic design category (SDC)

[Figure R301.2(2)]

________________________

SDC C&D provisions

(R301.2.2)

________________

Weathering_________________________________

Frost line depth______________________________

Termite area ________________________________

Decay area_________________________________

Winter design temperature_____________________

Ice barrier underlayment required _______________

Flood hazards ______________________________

FIRE-RESISTANT CONSTRUCTION (R302)

_________Exterior walls

[R302.1, Tables R302.1(1) and R302.1(2)]

_________Townhouse separation

(R302.2)

_________ Continuity and structural independence

(R302.2.1, R302.2.4)

_________ Parapets and construction

(R302.2.2, R302.2.3)

_________ Two-family dwelling separation

(R302.3)

_________ Dwelling unit penetrations

(R302.4)

_________ Dwelling/garage opening/penetration protec-

tion

(R302.5)

_________ Dwelling/garage fire separation

(R302.6)

_________ Under-stair protection

(R302.7)

_________ Wall and ceiling finishes

(R302.9)

_________ Flame spread index

(R302.9.1)

_________ Smoke-developed index

(R302.9.2)

_________ Testing

(R302.9.3, R302.9.4)

_________ Insulation

(R302.10)

_________ Flame spread/smoke-developed

(R302.10.1, R302.10.2)

_________ Cellulose loose-fill and exposed attic

insulation

(R302.10.3, R302.10.4)

_________ Testing

(R302.10.5)

_________ Fireblocking

(R302.11)

_________ Draftstopping

(R302.12)

_________ Combustible insulation clearance

(R302.13)

_________Required heating

(R303.9)

SANITATION (R306 and R307)

_________Water closet

_________Lavatory

_________Tub or shower

_________Kitchen area with sink

_________Sanitary sewer

(Chapter 30)

_________Private disposal

(Appendix I)

GLAZING (R308)

_________ Identification

(R308.1)

_________ Louvered windows or jalousies

(R308.2)

_________ Human impact loads/hazardous locations

(R308.3, R308.4)

_________ Skylights and sloped glazing

(R308.6)

ROOM PLANNING REQUIREMENTS (R303 through R305)

* See Sections R303.1 & R303.3 for mechanical ventilation and artificial light and R303.4 for required whole-house mechanical ventilation.

† 6′-8″ min. at plumbing fixtures and for non-habitable basements.

Use Area (ft

) Width Ceiling height

†

Natural light* Natural ventilation*

Living

Dining

Kitchen

Bedroom

Bathroom

120

N.A.

7′-0″

N.A.

7′-0″

N.A

7′–0″

8% floor area

3 square feet

4% floor area

square feet

-4-

BUILDING PLANNING (cont'd.)

GARAGES AND CARPORTS (R309)

_________Floor surface noncombustible; sloped floor

(R309.1)

_________Carport: open two sides; noncombustible

floors; sloped floor

(R309.2)

_________Automatic garage door opener

(R309.4)

_________Fire sprinklers

(R309.5)

EMERGENCY ESCAPE AND RESCUE OPENINGS

(R310)

_________Where required

(R310.1)

_________Areas, height, width, operations

(R310.1.1 - R310.1.4)

_________Window wells

(R310.2)

_________Bars, grilles, covers and screens

(R310.4)

_________Under decks and porches

(R310.5)

MEANS OF EGRESS (R311)

_________General

(R311.1)

_________Egress door

(R311.2)

_________Landings at exterior doors

(R311.3 - R311.3.3)

_________Vertical egress

(R311.4)

_________Construction and attachment

(R311.5)

_________Hallways

(R311.6)

_________Stairway width, headroom, vertical rise,

walkline

(R311.7.1 - R311.7.4)

_________Stairway treads, risers profiles

(R311.7.5 - R311.7.5.4)

_________Stairway landings and walking surfaces

(R311.7.6, R311.7.7)

_________Handrails required

(R311.7.8)

_________Handrail height, continuity, grip-size

(R311.7.8.1 - R311.7.8.4)

_________Stairway illumination

(R303.6, R311.7.9)

_________Special stairways

(R311.7.10)

_________Ramp slope, landings, handrails

(R311.8)

GUARDS AND WINDOW PROTECTION (R312)

_________Required for open-sided surfaces, stairs,

ramps and landings > 30″ above floor/

grade

(R312.1.1)

_________Height - 36″

(R312.1.2)

_________ Opening limitations

(R312.1.3)

_________ Window fall protection

(R312.2)

AUTOMATIC FIRE SPRINKLER SYSTEMS (R313)

_________ Townhouses

(R313.1)

_________ One- and two-family dwellings

(R313.2)

SMOKE ALARMS (R314)

_________ Referenced standards

(R314.1, R314.2)

_________ Location and interconnection

(R314.3, R314.5)

_________ Power source

(R314.4)

CARBON MONOXIDE ALARMS (R315)

_________ New construction

(R315.1, R315.2)

_________ Existing construction

(R315.3)

_________ Referenced standard

(R315.4)

FOAM PLASTIC (R302.8, R316)

_________ Labeling

(R316.2)

_________ Surface burning, thermal barrier, specific

approval

(R316.3 - R316.7)

DECAY AND TERMITE PROTECTION (R317 and R318)

_________ Protection required

(Table R301.2(1), R317.1, R318.1)

_________ Quality mark

(R317.2 and R318.1.1)

SITE ADDRESS (R319)

_________ Address numbers

(R319.1)

ACCESSIBILITY (R320)

_________ Type B dwelling units applicable

(R320.1)

ELEVATORS/PLATFORM LIFTS (R321)

_________ Referenced standards

(R321.1 - R321.3)

FLOOD-RESISTANT CONSTRUCTION (R322)

_________ General

(R322.1)

_________ Hazard area and requirements

(R301.2.4, R309.3, R322.2, R322.3)

_________ Design professional

(R322.3.6)

STORM SHELTERS (R323)

_________ General/referenced standard

(R323.1)

-5-

FOUNDATIONS (Chapter 4)

MATERIALS (R402)

_________Wood foundations

(R402.1)

_________Concrete, compressive strength

(R402.2)

FOOTINGS (R403)

_________Soil bearing value

(R401.4, R403.1)

_________Footing width

(Table R403.1)

_________Footing edge thickness = 6″ minimum; footing

projection = 2″ minimum, but ≤ footing

thickness

(R403.1.1)

_________Footings in SDC C or D

(R403.1.2, R403.1.3

and R403.1.6.1)

_________Depth below (outside) grade = 12″ minimum;

but below frost line except for frost pro-

tected footings.

(R403.1.4, R403.1.4.1 and

R403.1.4.2)

_________Sill plate bolting in concrete/masonry =

″ di-

ameter bolts, within 12″ but not less than 7

bolt diameters from ends, 7″ embedment

(R403.1.6)

_________Footings adjacent to slopes

(R403.1.7)

_________Frost protected shallow foundations

(R403.3)

_________Footings for precast concrete foundation

(R403.4)

FOUNDATION/RETAINING WALLS (R404 - R406)

_________Masonry foundation walls

(R404.1.1)

_________Wall height, unbalanced backfill, nominal

thickness

[Tables R404.1.1(1) -

R404.1.1(4), R404.1.5.1]

_________Reinforcement size and spacing

[Tables R404.1.1(2) - R404.1.1(4)]

_________ Concrete foundation walls

(R404.1.2)

_________ Wall height, unbalanced backfill, nominal

thickness

[Tables R404.1.2(1) -

R404.1.2(8), R404.1.5.2]

_________ Horizontal and vertical reinforcement size and

spacing

[Tables R404.1.2(1) -

R404.1.2(8), R404.1.2.2, R404.1.2.3.7]

_________ Stay-in-place forms

(R404.1.2.3.6.1)

_________ SDC C and D provisions

(R404.1.2.4, R404.1.4)

_________ Height above finished grade

(R404.1.6)

_________ Sill plate size

(R404.3)

_________ Precast concrete foundation walls

(R404.5)

_________ Drains required if habitable or usable spaces

are below grade*

(R405)

_________ Soil class

(Table R405.1)

_________ Dampproofing if basements are below grade*

(R406.1)

_________ Waterproofing if high water table*

(R406.2)

* If uninhabitable, see Under-Floor Space

(R408)

COLUMNS (R407)

_________ Protection from decay or corrosion

(R407.1 and R407.2)

_________ Structural requirements

(R407.3)

_________ Anchorage

(R407.3)

_________ Wood columns (minimum 4″ square)

(R407.3)

_________ Steel columns (minimum 3″ diameter, Sched-

ule 40 pipe)

(R407.3)

TABLE R403.1

MINIMUM WIDTH OF CONCRETE, PRECAST OR MASONRY FOOTINGS (inches)

For SI: 1 inch = 25.4 mm, 1 pound per square foot = 0.0479 kPa.

a. Where minimum footing width is 12 inches, a single wythe of solid or fully grouted 12–inch nominal concrete masonry units is permitted.

LOAD-BEARING VALUE OF SOIL (psf)

1,500 2,000 3,000 ≥4,000

Conventional light–frame construction

1-story 12 12 12 12

2-story 15 12 12 12

3-story 23 17 12 12

4-inch brick veneer over light frame or 8-inch hollow concrete masonry

1-story 12 12 12 12

2-story 21 16 12 12

3-story 32 24 16 12

8-inch solid or fully grouted masonry

1-story 16 12 12 12

2-story 29 21 14 12

3-story 42 32 21 16

-6-

FOUNDATIONS (cont'd.)

UNDER-FLOOR SPACE (R408)

_________ Ventilation

(R408.1 and R408.2)

_________ Unvented crawl space

(R408.3)

_________ Access

(R408.4)

_________ Removal of debris

(R408.5)

_________ Finished grade

(R408.6)

_________ Flood resistance

(R408.7)

FLOORS (Chapter 5)

WOOD JOISTS AND GIRDERS (R502)

_________Species and grade

(R502.1)

_________Joists—Sleeping areas, LL = 30 psf

[Table R502.3.1(1)]

_________Joists—Nonsleeping areas, LL = 40 psf

[Table R502.3.1(2)]

_________Cantilevered joists

[Tables R502.3.3(1) and R502.3.3(2)]

_________Girder spans and header spans for exterior

bearing walls

[Table R502.5(1)]

_________Girder spans and header spans for interior

bearing walls

[Table R502.5(2)]

_________Joists under bearing partitions

(R502.4)

_________Bearing (1.5″ minimum on wood or metal; 3″

on masonry or concrete) and lapped joists

(3″)

(R502.6, R502.6.1)

_________Lateral restraint and bridging

(R502.7, R502.7.1)

_________Drilling and notching

(R502.8)

_________Fastening

(R502.9)

_________Framing of openings

(R502.10)

_________Wood trusses

(R502.11)

_________Draftstopping

(R502.12)

LUMBER FLOOR SHEATHING (R503.1)

_________Allowable span

(Table R503.1)

_________End joints

(R503.1.1)

WOOD STRUCTURAL PANEL SHEATHING (R503.2)

_________Grade

(R503.2.1)

_________Thickness

(R503.2.1)

_________Allowable spans

[Tables R503.2.1.1(1) and R503.2.1.1(2)]

_________Installation

[Table 602.3(1)]

PARTICLEBOARD UNDERLAYMENT (R503.3)

_________ Grade

(R503.3.1)

_________ Thickness

(R503.3.2)

_________ Installation

[Table R602.3(1)]

TREATED-WOOD FLOORS (ON GROUND) (R504)

_________ Base course: 4″ thick with maximum

″

gravel or

″ crushed stone

(R504.2.1)

_________ Moisture barrier: placed over base course

(R504.2.2)

_________ Materials

(R504.3)

STEEL FLOOR FRAMING (R505)

_________ Cold-formed steel; applicability limits;

in-line framing

(R505.1)

_________ Structural framing

(R505.2)

_________ Material

(R505.2.1)

_________ Identification

(R505.2.2)

_________ Corrosion protection

(R505.2.3)

_________ Fastening

(R505.2.4)

_________ Floor construction

(R505.3)

CONCRETE FLOORS (ON GROUND) (R506)

_________ Thickness: 3

″ minimum; Concrete strength

(R506.1)

_________ Support: prepared subgrade; maximum earth

fill = 8″; maximum sand or gravel fill = 24″

(R506.2.1)

_________ Base course: 4″ graded with 2″ maximum

aggregate

(R506.2.2)

_________ Vapor retarder

(R506.2.3)

_________ Reinforcement support

(R506.2.4)

DECKS (R507)

_________ Support, attachment

(R507.1 - R507.2.3)

_________ Wood/plastic materials

(R507.3)

-7-

WALL CONSTRUCTION (Chapter 6)

GENERAL (R601)

_________Design

(R601.2)

_________Component and cladding wind loads

[Table R301.2(2)]

WOOD CONSTRUCTION (R602)

_________Construction

[Figures R602.3(1) and R602.3(2)]

_________Stud grade

(R602.2)

_________Exterior walls

(R602.3)

_________Stud spacing

[R602.3.1, Table R602.3(5)]

_________Interior load-bearing walls

(R602.4)

_________Interior nonbearing walls: 2″ × 3″ at 24″ o.c.

or 2″ × 4″ flat at 16″ o.c.

(R602.5)

_________Drilling and notching—studs

(R602.6)

_________Drilling and notching—top plate

(R602.6.1)

_________Headers

[Tables R502.5(1), R502.5(2),

R602.7.2 and Figure R602.7.2]

_________Fireblocking

(R602.8, R302.11)

_________Cripple walls

(R602.9)

_________Wall bracing, lines, panels

(R602.10.1, R602.10.2)

_________Required length of bracing, method

[R602.10.3, R602.10.4, Tables

R602.10.3(1) and R602.10.3(3)]

_________Minimum length, connections, support, joints,

cripple walls

(R602.10.5 - R602.10.11)

_________Wall anchorage (SDC C and D)

(R602.11)

_________Simplified wall bracing

(R602.12)

STEEL WALL FRAMING (R603)

_________General

(R603.1)

_________Structural framing

(R603.2)

_________Material

(R603.2.1)

_________Identification

(R603.2.2)

_________ Corrosion protection

(R603.2.3)

_________ Fastening

(R603.2.4)

_________ Wall construction

(R603.3 - R603.5)

_________ Headers

(R603.6)

_________ Studs, tracks and structural sheathing

(R603.7 - R603.9)

SHEATHING (R604 and R605)

_________ Wood structural panels

(R604)

_________ Particleboard

(R605)

MASONRY CONSTRUCTION (R606 - R610)

_________ General design

(R606)

_________ SDC C and D

(R606.12)

_________ Unit masonry

(R607)

_________ Multiple-wythe masonry

(R608)

_________ Grouted masonry

(R609)

_________ Glass unit masonry

(R610)

EXTERIOR CONCRETE WALL CONSTRUCTION (R611)

_________ Applicability

(R611.2)

_________ Concrete wall systems

(R611.3)

_________ Stay-in-place forms

(R611.4)

_________ Materials, construction details

(R611.5 - R611.10)

EXTERIOR WINDOWS & DOORS

(R612)

_________ General; performance; testing and labeling

(R612)

STRUCTURAL INSULATED PANEL WALL

CONSTRUCTION (R613)

_________ Applicability

(R613.2)

_________ Materials

(R613.3)

_________ Wall panels, construction details

(R613.4 - R613.10)

-8-

WALL COVERING (Chapter 7)

INTERIOR WALL COVERING (R702)

_________Plaster material

(R702.2)

_________Plaster support

(R702.2.3)

_________Gypsum board material

(R702.3.1)

_________Gypsum board support, application and fas-

tening

(R702.3.2 - R702.3.8)

_________Ceramic tile

(R702.4)

_________Other finishes

(R702.5 and R702.6)

_________Vapor retarders

(R702.7)

EXTERIOR WALL COVERING (R703)

_________Water-resistive barrier

(R703.2)

_________Wood siding

(R703.3)

_________Attachment and minimum thickness

(Table R703.4)

_________ Wood shakes and shingles

(R703.5)

_________ Exterior plaster

(R703.6)

_________ Stone & masonry veneer

(R703.7 & Figure

R703.7)

; Steel angle lintels-4″ minimum

bearing each end

(R703.7.3)

_________ Veneer ties: #9 U.S. gage wire or #22 U.S.

gage by

″ corrugated metal; horizontal

and vertical spacing; 2.67 square feet

maximum area supported (wind > 30 psf

and SDC C or D, maximum area = 2

square feet)

(R703.7.4.1)

_________ Flashing

(R703.7.5 and R703.8)

_________ Exterior insulation and finish systems

(R703.9)

_________ Fiber cement siding

(R703.10)

_________ Vinyl siding

(R703.11)

ROOF-CEILING CONSTRUCTION (Chapter 8)

GENERAL (R801)

_________Design

(R801.2 and R801.3)

_________Component and cladding wind loads

[Table R301.2(2)]

WOOD ROOF FRAMING (R802)

_________Fire-retardant-treated wood

(R802.1.3)

_________Framing details

(R802.3)

_________Rafter tie

(R802.3.1)

_________Collar ties (4″ o.c., in upper third of attic)

(R802.3.1)

_________Purlins (2″ × 4″ at 4′ o.c. minimum)

(Figure R802.5.1, R802.5.1)

_________Bearing

(R802.6)

_________Cutting and notching

(R802.7)

_________Engineered wood products

(R802.7.2)

_________Lateral support and bridging

(R802.8)

_________Framing of openings

(R802.9)

_________Wood trusses

(R802.10)

_________Roof tie-down

(R802.11)

CEILING JOISTS [Tables R802.4(1), R802.4(2)]

_________Without attic storage, LL = 10psf

_________With attic storage LL = 20psf

_________ Spacing

_________ Species and grade

_________ Span

_________ Size

RAFTERS [Tables R802.5.1(1) - R802.5.1(8)]

_________ Ground snow load/LL = 20psf

_________ Controlling design (LL or snow)

_________ Ceiling not attached/ceiling attached

_________ Spacing

_________ Species and grade

_________ Span

_________ Size

_________ H

; Adjustment factor

ROOF SHEATHING (R803.2)

_________ Grade

_________ Thickness

_________ FRTW allowable stresses/grading

_________ Allowable spans

[Table R503.2.1.1(1)]

_________ Installation

(R803.2.3)

-9-

ROOF-CEILING CONSTRUCTION (cont'd.)

STEEL ROOF FRAMING (R804)

_________General

(R804.1)

_________Structural framing

(R804.2)

_________Material

(R804.2.1)

_________Identification

(R804.2.2)

_________Corrosion protection

(R804.2.3)

_________Fastening

(R804.2.4)

_________ Roof construction

(R804.3)

_________ Roof tie-down

(R804.3.9)

ROOF VENTILATION (R806)

_________ Ventilation requirements

(R806.1 - R806.5)

ATTIC ACCESS (R807)

_________ Access requirements

(807.1)

CHIMNEYS AND FIREPLACES (Chapter 10)

MASONRY FIREPLACES (R1001)

_________Construction

(Figure R1001.1 and Table R1001.1)

_________SDC D reinforcing/anchorage

(R1001.3 and R1001.4)

_________Firebox walls and dimensions

(R1001.5 and R1001.6)

_________Steel fireplace units

(R1001.5.1)

_________Lintel (noncombustible)

(R1001.7)

_________ Hearth extension

(R1001.9, R1001.10)

_________ Fireplace clearance

(R1001.11)

_________ Fireblocking

(R1001.12)

MASONRY CHIMNEYS (R1003)

_________ Construction

(Table R1001.1, R1003.2,

R1003.3, and Figure R1001.1)

_________ Corbeling

(R1003.5)

ROOF ASSEMBLIES (Chapter 9)

ROOF CLASSIFICATION (R902)

_________Roof covering materials

(R902.1)

WEATHER PROTECTION (R903)

_________Flashing

(R903.2)

_________Coping

(R903.3)

_________Roof drainage

(R903.4)

MATERIALS (R904)

_________Compatibility; specifications; physical charac-

teristics; identification

(R904.2 - R904.4)

REQUIREMENTS FOR ROOF COVERINGS (R905)

_________Asphalt shingles

(R905.2)

_________Clay and concrete tile

(R905.3)

_________Metal roof shingles

(R905.4)

_________Mineral-surfaced roll roofing

(R905.5)

_________Slate and slate-type shingles

(R905.6)

_________Wood shingles

(R905.7)

_________ Wood shakes

(R905.8)

_________ Built-up roofs

(R905.9)

_________ Metal roof panels

(R905.10)

_________ Modified bitumen roofing

(R905.11)

_________ Thermoset single-ply roofing

(R905.12)

_________ Thermoplastic single-ply roofing

(R905.13)

_________ Sprayed polyurethane foam roofing

(R905.14)

_________ Liquid-applied coatings

(R905.15)

_________ Photovoltaic shingles

(R905.16)

ROOF INSULATION (R906)

_________ General

(R906.1)

REROOFING (R907)

_________ Materials and methods

(R907.1)

_________ Structural support

(R907.2)

_________ Recover vs replace

(R907.3)

-10-

CHIMNEYS AND FIREPLACES (cont'd.)

_________Changes in dimension

(R1003.6)

_________Additional load

(R1003.8)

_________Termination

(R1003.9)

_________Spark arrestors

(R1003.9.2)

_________Wall thickness; ≥ 4″

(R1003.10)

_________Flue lining - material/installation

(R1003.11 and R1003.12)

_________Multiple flues

(R1003.13)

_________Flue area (appliance)

(R1003.14)

_________Flue area (masonry fireplace)

(R1003.15)

_________Inlet

(R1003.16)

_________Cleanout opening

(R1003.17)

_________ Chimney clearance

(R1003.18)

_________ Fireblocking

(R1003.19)

_________ Chimney crickets

(R1003.20)

FACTORY-BUILT FIREPLACES (R1004)

_________ Listed and labeled

(R1004.1)

_________ Installation

(R1004.2)

FACTORY-BUILT CHIMNEYS (R1005)

_________ Listed and labeled

(R1005.1)

_________ Installation

(R1005.3 and R1005.4)

EXTERIOR AIR SUPPLY (R1006)

_________ Intake size

(R1006.2, R1006.4)

ENERGY EFFICIENCY (Chapter 11)

_________Compliance; information

(N1101.5, N1101.8)

_________Climate zone

(Table N1101.10)

_________Building thermal envelope

(N1102)

_________ Systems

(N1103)

_________ Electrical

(N1104)

_________ Simulated performance

(N1105)

MECHANICAL (Chapters 12-23)

_________Appliance labeling

(M1302, M1303)

_________Appliance access

(M1305, M1401)

_________Appliance installation

(M1307)

_________Heating and cooling equipment; load calcula-

tions

(Chapter 14)

_________Exhaust systems

(Chapter 15)

_________Duct systems

(Chapter 16)

_________Combustion air

(Chapter 17)

_________ Chimney and vent location and terminations

(Chapters 10 and 18)

_________ Special equipment

(Chapter 19)

_________ Boilers/water heaters

(Chapter 20)

_________ Hydronic piping

(Chapter 21)

_________ Special piping and storage systems

(Chapter 22)

_________ Solar systems

(Chapter 23)

_________ Penetrations of fire-resistance rated assem-

blies

(R302.4, R302.5)

FUEL GAS (Chapter 24)

_________Application

(G2401.1)

_________General regulations

(G2404)

_________Appliance location

(G2406)

_________Air requirements

(G2407)

_________Installation

(G2408)

_________ Clearances

(G2409)

_________ Electrical and electrical bonding

(G2410, G2411)

_________ Pipe sizing

(G2413)

_________ Piping materials

(G2414)

-11-

FUEL GAS (cont'd)

_________Piping installation

(G2415 and G2419)

_________Piping support

(G2418 and G2424)

_________Valves, controls, connections

(G2420, G2421 and G2422)

_________ Venting

(G2425 - G2429)

_________ Misc appliances

(G2423, G2430 - G2454)

PLUMBING (Chapters 25-33)

_________Water service location and depth

(P2603, P2604)

_________Sanitary and storm sewer location and depth

(P2603, P2604)

_________Piping support

(Table P2605.1)

_________Listed plastic materials

(P2609)

_________Plumbing fixtures

(Chapter 27)

_________Water heater size and location

(Chapter 28)

_________Water supply and distribution system design

and calculations

(Chapter 29)

_________Dwelling unit fire sprinkler systems

(P2904)

_________ NFPA 13D system

(P2904.1)

_________ Temperature rating

(P2904.2.1, P2904.2.2)

_________ Freezing protection

(P2904.2.3)

_________ Sprinkler coverage

(P2904.2.4)

_________ Piping materials

(P2904.3)

_________ Flow rates

(P2904.4.1, P2904.4.2)

_________ Water supply capacity

(P2904.5.2)

_________ Pipe sizing

(P2904.6)

_________ Drain, waste and vent pipe sizing and riser

diagram

(P3004, P3005, Chapter 31)

_________ Sumps and ejectors

(P3007)

_________ Backwater valves

(P3008)

_________ Fixture traps

(P3201)

_________ Storm drainage

(Chapter 33)

_________ Penetrations of fire-resistance rated assem-

blies

(R302.4, R302.5)

ELECTRICAL (Chapters 34-43)

_________Penetrations of fire-resistance rated assem-

blies

(E3402.2)

_________Listed and labeled materials

(E3403)

_________Service equipment and location

(E3405, E3601, E3606)

_________Service size and load calculations

(E3602)

_________Available fault current

(E3606)

_________System grounding

(E3607)

_________Required branch circuits

(E3703)

_________Feeder requirements and load calculations

(E3704)

_________ Wiring methods

(Chapter 38)

_________ Required lighting and receptacle outlets

(E3901, E3903)

_________ Ground-fault and arc-fault circuit-interrupter

protection

(E3902)

_________ Devices and lighting fixtures

(Chapter 40)

_________ Appliance installation

(Chapter 41)

_________ Swimming pools

(Chapter 42)

_________ Class 2 remote-control, signaling and power-

limited circuits (

Chapter 43)

MANUFACTURED HOUSING USED AS DWELLINGS (Appendix E)

_________Provisions adopted

(R102.5)

_________ Compliance with Appendix E verified

-12-

RADON CONTROL MEASURES (Appendix F)

_________Provisions adopted

(R102.5)

_________ Compliance with Appendix F verified

SWIMMING POOLS, SPAS AND HOT TUBS (Appendix G)

_________ Provisions adopted

(R102.5)

_________ Compliance with Appendix G verified

PATIO COVERS (Appendix H)

_________ Provisions adopted

(R102.5)

_________ Compliance with Appendix H verified

PRIVATE SEWAGE DISPOSAL (Appendix I)

_________Provisions adopted

(R102.5)

_________ Compliance with Appendix I verified

EXISTING BUILDINGS AND STRUCTURES (Appendix J)

_________Provisions adopted

(R102.5)

_________ Compliance with Appendix J verified

SOUND TRANSMISSION (Appendix K)

_________Provisions adopted

(R102.5)

_________ Compliance with Appendix K verified

HOME DAY CARE—R-3 OCCUPANCY (Appendix M)

_________Provisions adopted

(R102.5)

_________ Compliance with Appendix M verified

NOTES

AUTOMATIC VEHICULAR GATES (Appendix O)

_________Provisions adopted

(R102.5)

_________ Compliance with Appendix O verified

Download
Save PDF to desktop

Email
Email completed PDF

Send for Signing
Email for others to sign

Print
Print document

NAME

2012 Irc Planreview Int (Sussex County, Virginia)

View Audit Log
Print With Audit Log
Duplicate Document

Fillable 2012 Irc Planreview Int (Sussex County, Virginia)

Fill Online, Printable, Fillable, Blank 2012 Irc Planreview Int (Sussex County, Virginia) Form

Related forms

First 20 documents completely FREE!