Fillable 085327 Alena™ | Drapery System

Fill Online, Printable, Fillable, Blank 085327 Alena™ | Drapery System Form

Use Fill to complete blank online LUTRON ELECTRONICS, INC. pdf forms for free. Once completed you can sign your fillable form or send for signing. All forms are printable and downloadable.

085327 Alena™ | Drapery System

On average this form takes 19 minutes to complete

The 085327 Alena™ | Drapery System form is 17 pages long and contains:

  • 0 signatures
  • 0 check-boxes
  • 77 other fields

Country of origin: US
File type: PDF

Use our library of forms to quickly fill and sign your Lutron Electronics, Inc. forms online.

BROWSE LUTRON ELECTRONICS, INC. FORMS

Related forms
Fill has a huge library of thousands of forms all set up to be filled in easily and signed.
Fill in your chosen form
Sign the form using our drawing tool
Send to someone else to fill in and sign.
find another form
 
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 1 05.08.19
The Alena Drapery System is an easily installed, low-cost
window treatment solution designed for the hospitality and
multi-dwelling market. Guests have several options for
convenient control via Lutron remote controls and keypads,
or by pulling the drapery panel in the direction they want it
to move. If a user is unaware of the control device, they will
learn of the drapery’s motorization when they manually pull
on the panel. The drive will take over and move the panel
automatically to its Open or Close limit.
Features
• Pull-to-Start function* allows for motorized operation
with or without controls
• Ultra-quiet drive operation: will not exceed 50 dBA
measured 1 m (3 ft) from the drive
• Pinch Pleat and Ripplefold options
• Left, right, and center-draw options
• All drives start, move, and stop with precision
• Ceiling or recess mounting options
• Can be installed in new construction or
retrofit application
• Available with white, silver, and bronze track colors
• Power failure memory for the lifetime of
the product
• Decouples the EDU and track into two separate
components, allowing the EDU to be replaced or
upgraded in the field
• Low-voltage, DC power
• 8 year limited warranty
* For reliable Pull-to-Start performance, grasp the draw
edge of the drape no more than 5 ft (152 cm) from the
top, and pull in the direction of desired travel
Alena QS Drapery System
Alena
QS Wireless Drapery System
Alena Pinch Pleat Drapery System
for illustrative purposes only; not a system specification drawing
Alena Ripplefold Drapery System
for illustrative purposes only; not a system specification drawing
1
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 2 04.22.19
Power
• PELV / NEC Class 2, 24-36 V- power supply required.
• Control system power supply offers (spike and brownout)
over voltage protection (+/- 10% of line voltage) for all
devices in the system.
• Power must be derived from the Lutron power supply
provided with the drapery system
Performance
• Uses steel-reinforced high-strength, low-friction belt to
reduce noise and drag
• Supports drapery panels weighing up to 80 pounds
(36.3 kg) on a straight, un-spliced track
• Available in track lengths up to 16.4 ft (5 m)
• Can be controlled from multiple locations (i.e. manually
at drape, or via keypad), and allows for manual operation
when power is not available
• All system components are Electro Static
Discharge (ESD) protected
System Capacity
•
Maximum of 1 drive per power supply
Compatible Controls (Alena QS)
• seeTouch QS keypads
• GRAFIK Eye QS
• Pico Wireless Control (through QSM)
• HomeWorks QS
• myRoom Plus
Compatible Controls (Alena QS Wireless)
• Pico wireless control
• Serena 4-Group wireless control
• seeTouch RF keypads
• GRAFIK Eye QS
• RadioRA 2
• HomeWorks QS
• Caséta Wireless (Lutron Smart Bridge Pro required)
• myRoom Prime*
*Alena drapery tracks can be installed alongside a
myRoom
TM Prime system, however the two systems will not
have integrated functionality
Specifications
System Weight Capacity
Use this table to determine the maximum pinch pleat or ripplefold drapery panel
size the Alena QS drapery system can operate, based upon height and weight.
System Capacity
System Width - Straight Track Pinch Pleat Ripplefold
24 in to 32 in (600 mm to 800 mm) 20 lbs (9 kg) 20 lbs (9 kg)
32 in to 44 in (800 mm to 1100 mm) 30 lbs (13.6 kg) 30 lbs (13.6 kg)
44 in to 56 in (1100 mm to 1400 mm) 40 lbs (18 kg) 40 lbs (18 kg)
56 in to 68 in (1400 mm to 1700 mm) 55 lbs (24.9 kg) 45 lbs (20.4 kg)
68 in to 84 in (1700 mm to 2133 mm) 65 lbs (29.5 kg) 45 lbs (20.4 kg)
84 in to 108 in (2133 mm to 2743 mm) 80 lbs (36.3 kg) 45 lbs (20.4 kg)
108 in to 132 in (2743 mm to 3353 mm) 80 lbs (36.3 kg) 45 lbs (20.4 kg)
132 in to 156 in (3353 mm to 3962 mm) 80 lbs (36.3 kg) 45 lbs (20.4 kg)
156 in to 216 in (3962 mm to 5486 mm) 80 lbs (36.3 kg) 45 lbs (20.4 kg)
IMPORTANT: The sizes and weight capacities shown above are applicable to straight track only. For assistance
with curved track or configurations exceeding the sizes or weights listed, please contact Lutron Customer Service.
2
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 3 04.22.19
System dimensions (pinch pleat carriers shown; ripplefold snap-pendants available)
Top view (single track, right draw)
2.1 in (52.1 mm)
1.3 in (31.8 mm)
1.6 in (41.3 mm)
Track width 216 in (5.48 m) max
3.3 in (83.82 mm)
10.6 in (270 mm)
Front view (single track, right draw)
8.89 in
(225.6 mm)
3.3 in
(83.8 mm)
2.1 in
(52.3 mm)
Electronic Drive Unit
1.9 lbs (0.9 kg)
3
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 4 04.22.19
Drapery track options (valance and drapery not included)
Center-draw, left-or right-mounted EDU
Left draw/left-mounted EDU
(pinch pleat carriers shown; ripplefold snap-pendants available)
Right draw/right-mounted EDU
(pinch pleat carriers shown; ripplefold snap-pendants available)
Pinch Pleat Ripplefold Butt-closure Ripplefold Overlap-closure
Installation Clearances
Dual drapery track system
Two Alena drapery tracks can be used for a combination sheer/blackout treatment.
Dimensions*
11.25 in (286 mm)
3.5 in (89 mm)
2.5 in (64 mm)
1 in (25 mm)
Dimensions*
11.25 in (286 mm)
3.5 in (89 mm)
2.5 in (64 mm)
1 in (25 mm)
5.5 in (140 mm)
Single drapery track system
Maintain enough clearance between the drapery track and the inside face of the top treatment or ceiling recess to
allow the fabric to move freely.
Plan View
(mounting details not shown)
Plan View
(mounting details not shown)
Elevation View
Elevation View
4
Ceiling
Washer
Cam
Lock
Top View
Within 8 in
(203 mm)
16-24 in
(400-600 mm)
16-24 in
(400-600 mm)
16 in
(400 mm)
16 in
(400 mm)
BA B AC CD
Within 8 in
(203 mm)
7.25 in
(184 mm)
7.375 in
(187 mm)
11 in (279 mm)16 in (406 mm)16 in (406 mm)
1. Mount a cam lock (B) within 8 in (200 mm) of each end of the system (A).
2. Mount the next cam locks (C) 16 in (400 mm) inward from each end cam-lock (B).
3. Space the remaining cam locks (D) 16-24 in (406-610 mm) apart.
4. For non-sheer fabric panels, 16 in (406 mm) spacing is recommended between cam locks at stackback location(s).
1. Install a recess-mount bracket (B) within 7.25 in (184 mm) of the idler end of the system (A).
2. Install a recess-mount bracket (D) within 7.375 in (187 mm) of the drive end of the system (C).
3. Install the next recess-mount bracket (E) 11 in (279 mm) inward from the first drive-end recess-mount bracket (D).
4. Space the remaining recess-mount brackets (F) 16 in (406 mm) apart.
B DEFDA C
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 5 04.22.19
Mounting Options
Recess MountCeiling Mount
Cam Lock Spacing - Ceiling Mount
Bracket Spacing - Recess Mount
1½ inch
Wood Screw
Structural Member
Recessed Pocket
Recess-Mount
Bracket
Drapery Track
2.25 in (57 mm)
Minimum Pocket Width
1 1/16 in
(27 mm)
Minimum
Pocket Depth
1.3 in
(31.8 mm)
Structural
Member
Drapery
Track
1.2 in
(31 mm)
Recess-Mount Bracket
(qty. varies with track length)
Cam
Lock
Washer
Ceiling
Ceiling
Within Within
5
S
80% Fullness
Fabric panel width = track width + 80%
S = 2.375 in (60 mm)
Stackback Example
(approximate; center-draw)
Stackback Example
(approximate; center-draw)
Stackback Example
(approximate; center-draw)
100% Fullness
Fabric panel width = track width + 100%
S = 2.125 in (54 mm)
120% Fullness
Fabric panel width = track width + 120%
S = 1.875 in (48 mm)
S
S
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 6 04.22.19
Fabric Fullness
Generally, drapery “fullness” is the aesthetic result of adding more or less fabric to a given system width. Lutron
expresses fullness as a multiple (pinch pleat; 2x, 2.5x, 3x) or percentage (ripplefold; 80%, 100%, 120%) of (flat)
fabric panel width, relative to system (track) width.
• Lower fullness results in smaller stackback size when open and more spread when closed.
• Higher fullness results in larger stackback size when open and less spread when closed.
Ripplefold Fabric Fullness
Fullness is determined by the string length between auxiliary carriers (S) and the total width of the fabric panel.
Lutron offers fullness ratings of 80%, 100%, and 120%, based on standard snap spacing of 4.25 in (108 mm).
(See ripplefold snap tape specifications on page 10.)
Pinch Pleat Fabric Fullness
Pinch pleat drapery panels are offered at 3 fullness ratings:
• 3x: fabric panel width (before pleating) = track width x 3 (sheer fabrics only)
• 2.5x: fabric panel width (before pleating) = track width x 2.5
• 2x: fabric panel width (before pleating) = track width x 2
Note: Due to potential variations in final pleating, Lutron intentionally over-estimates the number of auxiliary
carriers provided with pinch pleat drapery track systems. Extra carriers may be included.
30.625 in
(778 mm)
32.6875 in
(830 mm)
36.125 in
(918 mm)
30.625 in
(778 mm)
32.6875 in
(830 mm)
36.125 in
(918 mm)
216 in (5486 mm) 216 in (5486 mm) 216 in (5486 mm)
154.75 in (3931 mm) 150.625 in (3826 mm) 143.75 in (3651 mm)
6
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 7 04.22.19
Drapery fabric
Adjustment of the drapery pin height may be necessary to
align these pleats with the other pleats on the drapery panel.
Lutron recommends a drapery hook setting of 1/2 in (13 mm) from the top of the drape to the top of the hook
(hooks not included). This locates the drapes just below the track and prevents it from rubbing on the track. It is
recommended that a distance of 1/2-1 in (13-25 mm) be maintained between the bottom of drapery panel and
the floor.
Dressing the Drape Around the Drive End
Hanging Fabric - Pinch Pleat
1/2 in (13 mm)
Top of drapery panel
Floor
Bottom of
drapery track
5/8 in
(16 mm)
1/2-1 in (13-25 mm)
Bottom of
drapery panel
Drapery
panel
height +
5/8-
1 1/8 in
(16-29
mm)
7
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 8 04.22.19
Drapes are typically sized so the bottom of the drapery track and top of the drapery panel are located 4 in (101 mm) above
the window casing. Location may need to be adjusted to accommodate the specific drapery panel height and application. It
is recommended that a space of 1⁄2-1 in (13-25 mm) be maintained between the bottom of drapery panel and the floor.
Hanging Fabric - Ripplefold
1
⁄2 in (13 mm)
3
⁄4 in (19 mm)
Floor
Snap Tape
Drapery Panel
Drapery Track
1
⁄2-1 in (13-25 mm)
Bottom of
drapery panel
Drapery
panel
height
+
3
⁄4-1
1
⁄4 in
(19-32 mm)
One-Way Draw
Center Draw
One-way draw Master Carrier
(accepts 3 female snaps)
Auxiliary snap locations
(carriers accept male snaps)
Drive-end snap bracket
(accepts 3 male snaps)
Butt-closure
Idler-end Snap Bracket
(accepts 3 male snaps)
Auxiliary snap
locations
(carriers accept male snaps)
Drive-end snap bracket
(accepts 3 male snaps)
Center-draw, butt-closure
Master Carriers
(each carrier accepts
3 female snaps)
Overlap-closure
Idler-end Snap Bracket
(accepts 3 male snaps)
* The right fabric panel
has one more auxiliary
snap than the left.
*
Auxiliary snap
locations
(carriers accept male snaps)
Drive-end snap bracket
(accepts 3 male snaps)
Center-draw, overlap-closure
Master Carriers
(each carrier accepts
3 female snaps)
8
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 9 04.22.19
The Lutron Ripplefold Drapery System is compatible with standard ripplefold snap tape with spacing of
4.25 in (108 mm) between snaps.
• Standard carriers accept male snaps; quantity required varies with track width.
• Three (3) female snaps are required at the draw end as shown.
– Compatible female snap tap is available from Alan Richard Textiles, Ltd.
By the yard: alanrichardtextiles.com/store/DRFT02-Y.html
By 100 yard (91.4 m) roll: alanrichardtextiles.com/store/DRFT02.html
• Single-draw configurations require one drapery panel.
• Center-draw configurations require 2 drapery panels
– Butt-closure: snap layout shown below mirrored on the second panel.
– Overlap-closure: the draw and return end snap layouts shown below are mirrored on the second panel, and the
right panel requires one more auxiliary snap than the left. (See the Overlap-Closure diagram on previous page.)
A = Standard ripplefold snap tape spacing of 4.25 in (108 mm)
B = 1 in (25 mm)
C = Varies with return distance
D = 0.75 in (19 mm)
DRAPERY PANEL
Return
Male
Snaps
Edge Sew Detail
Top edge
of fabric
Snap Tape
Female
Snaps
*
Draw
Edge Sew Detail
A AA AABC B DA
0.125 in
(3 mm)
* NOTE: Users will pull on the
drapery, putting a load on the
female snaps. Use Tex 40
thread or stronger to attach
the tape to the fabric.
*
Ripplefold Snap Tape Specifications
9
QSPS-P1-1-35V
Power Supply Models
NEMA 5-15 Plug
QSPS-P2-1-35V
CEE 7/7Plug
QSPS-P3-1-35V
BS 1363 Plug
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 10 04.22.19
Terminal block of drive
controlling single drape
Wire Type B
Wire Type A
Alena
Drapery
Drive
Keypad
MUX
MUX
V+
Com
MUX
MUX
V+
Com
Wiring types Purpose Wire options
A Keypad power and comm 18-22 AWG (1.00-0.50 mm²) - 250 ft (75 m) max
B Drive power (power supply to Drive) 12 AWG - (4 mm²)-250 ft (75 m) max
16 AWG - (1.5 mm²)-100 ft (30 m) max
Lutron P/N QSHY-CBL-M-1000 Non-plenum
Lutron P/N QSHY-CBLP-M-1000 plenum
18 AWG - (1 mm²)-50 ft (17 m) max
Alena QS | Single Drive Wiring
4-pin EDU connector
QSPS-P1-1-35V
NEMA 5-15 Plug
QSPS-P2-1-35V
CEE 7/7Plug
QSPS-P3-1-35V
BS 1363 Plug
Power Supply Models
Power Supply
10
QSPS-P1-1-35V
Power Supply Models
NEMA 5-15 Plug
QSPS-P2-1-35V
CEE 7/7Plug
QSPS-P3-1-35V
BS 1363 Plug
SPECIFICATION SUBMITTAL Page
Job Name:
Job Number:
Model Numbers:
Alena QS and QS Wireless Drapery Systems System Specification
085327f 11 04.22.19
Close
Open
24-
Com
Wiring types Purpose Wire options
A Drive power (power supply to Drive) 12 AWG - (4 mm²)-250 ft (75 m) max
16 AWG - (1.5 mm²)-100 ft (30 m) max
Lutron P/N QSHY-CBL-M-1000 Non-plenum
Lutron P/N QSHY-CBLP-M-1000 plenum
18 AWG - (1 mm²)-50 ft (17 m) max
Terminal block of Drive
controlling single Drape
NOTE: Terminals 3 and 4 are
for wired communication only,
and are not used in wireless
control installations
RF Receiver
(QS Wireless only)
Drive RF and RF Receiver Connectors
(pre-wired; QS Wireless only)
Wire Type A
Alena QS Wireless | Single Drive Wiring
Alena
Drapery
Drive
4-pin EDU connector
MUX
MUX
V
+
Com
QSPS-P1-1-35V
NEMA 5-15 Plug
QSPS-P2-1-35V
CEE 7/7Plug
QSPS-P3-1-35V
BS 1363 Plug
Power Supply Models
Power Supply
11
Download
Save PDF to desktop
Email
Email completed PDF
Send for Signing
Email for others to sign
Print
Print document
Choose a Field
Click on a field and
select the person that should complete it
Want to add a signature?
You can add a signature field
and assign it to someone else
to sign
Choose a Field
Click on a field and
select the person that should complete it

085327 Alena Drapery System

This document is locked as it has been sent for signing.

You have successfully completed this document.

Other parties need to complete fields in the document. You will recieve an email notification when the document has been completed by all parties.

This document has been signed by all parties.

Completed 7 May 2020

Message

View Audit Log
Print With Audit Log
Duplicate Document